Manual Toshiba TEC B-SX4T SERIES (page 18 of 54) (English)

626991

Zoom out

Zoom in

1/54

2. PRINTER SETUP

ENGLISH VERSION EO1-33034

2.7 Loading the Media

E2- 8

2.7 Loading the Media

(Cont.)

10.

Lower the Print Head Block until it stops.

11.

After loading the media, it may be necessary to set the Media

Sensors used to detect the print start position for label or tag

printing.

Setting the Feed Gap Sensor position

(1) Remove the Locking Screw that secures the Media Sensor.

(2) Manually move the Media Sensor so that the Feed Gap Sensor is

positioned at the center of the labels. ( indicates the position of

the Feed Gap Sensor).

(3) Tighten the Locking Screw.

Setting the Black Mark Sensor position

(1) Remove the Locking Screw that secures the Media Sensor.

(2) Pull about 500 mm of media out of the front of the printer, turn the

media back on itself and feed it under the Print Head past the sensor

so that the black mark can be seen from above.

(3) Manually move the Media Sensor so that the Black Mark Sensor is

in line with the center of the black mark on the media. ( indicates

the position of the Black Mark Sensor).

(4) Tighten the Locking Screw.

NOTE:

e sure to set the black mark

sensor to detect the centre of the

black mark, otherwise a paper

am or no paper error may occur.

Locking Screw

Black Mark Sensor

Black Mark

Feed Gap Sensor

Label

Gap

Locking Screw

Media Sensor

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TEC B-SX4T SERIES in the language / languages: English as an attachment in your email.

The manual is 2,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Toshiba TEC B-SX4T SERIES Manual

Product: