626989
24
Zoom out
Zoom in
Previous page
1/30
Next page
4. TROUBLESHOOTING
ENGLISH VERSION
4.1 Troubleshooting Guide
E4- 1
4. TROUBLESHOOTING
This chapter lists the error messages, possible problems, and their solutions.
4.1 Troubleshooting Guide
Problems Solutions
The Online Indicator Lamp (green) is not
illuminated.
1.
Check that the Power Cord is properly connected.
2.
If the LED on the AC Adapter is not illuminated,
please contact an authorised TOSHIBA TEC service
representative.
The Online Indicator Lamp (green) is flashing. The printer is in PAUSE state. Press the FEED/PAUSE
Button to return to Online state.
The Error Indicator Lamp (red) is illuminated, not
flashing.
The Top Cover is not closed completely. Close the Top
Cover completely and confirm that the Indicator Lamp
flashes. Then press the FEED/PAUSE Button to return
to Online state.
The Error Indicator Lamp (red) is flashing. 1.
The media has run out. Install a new media roll.
2.
The Media Sensor cannot detect the print start
position. Retry the Media Sensor calibration.
3.
A paper jam occurred.
4.
A cutter jam occurred.
After removing causes of the problems, press the
FEED/PAUSE Button to return to Online state.
Poor print quality 1.
The Top Cover is not closed completely. Close the
Top Cover completely.
2.
Clean the Print Head.
3.
The media being used is not with in specification.
Use TOSHIBA TEC recommended media only.
4.2 Removing Jammed Media
This section describes in detail how to remove jammed media from the printer.
1. Turn the power off.
2. Open the Top Cover.
3.
Remove the media.
4. Remove the jammed media from the printer. DO NOT USE any sharp implements or tools as these could
damage the printer.
5.
Clean the Print Head with the Print Head Cleaner and remove dust or paper particles.
6. Load the media and close the Top Cover.
WARNING!
If a problem cannot be solved by taking actions described in this chapter, do not attempt to repair the
printer. Turn off and unplug the printer. Then contact an authorised TOSHIBA TEC service
representative for assistance.
CAUTION!
Do not use any tool that may damage the print head.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TEC B-SV4T-GS10-QM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TEC B-SV4T-GS10-QM in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info