214673
39
Zoom out
Zoom in
Previous page
1/51
Next page
76 77
Network and
USB memory
How to use [Profi le settings]
This feature allows the user to save the computer’s wireless LAN settings.
This feature is useful when you need to change wireless LAN settings according to
where you use.
Advanced setting
This feature allows the user to set details for Easy Connect settings. Make the following
settings as required in this dialog.
Registering profi le automatically
Check this checkbox to automatically register the settings of the Easy Connect as
profi le setting data.
Switching settings automatically at start-up
Check this checkbox to automatically switch to the last used wireless LAN settings
when launching the Network Utility.
WEB browser
Where the computer and the projector are connected over the network, bring up the
window of Projector Confi guration Tool by pressing the WEB browser button.
Precautions
If the page is not displayed correctly, re-select the projector.
When the network settings are changed, the network connection is disconnected. If
you wish to reconnect, set up the computer again.
Precaution
The simple 1:1 connection, the USB memory connection and the profi le setting may not
work normally depending on the type of the wireless LAN adapter and the wireless LAN
embedded computer. When such a case arises, use the Network Utility menu to make
necessary wireless LAN settings manually.
Operating the projector
This function can be used with any projector input.
1
Launch the Network Utility software application.
The Screen Image transmission mode window appears on the computer’s screen.
2
Click on the Remote
Control button.
The Remote Control window
appears.
As the Network Utility window is
still displayed, you can operate the
projector via the Remote Control
window, while using the Network
Utility’s functions.
While it is possible to use this function merely to operate the projector, closing the
Network Utility also closes the Remote Control window.
3
Select the projector to be operated.
In the Remote Control window, click on the button, and select the
desired projector from the pull-down list. When you make a selection, the
Remote Control window displays as shown in the right fi gure.
Only one projector can be selected. (It is not possible to operate multiple
projectors.)
4
Click on the Remote Control window’s buttons.
The function of each button and box is as follows:
Power On: Turns projector power on.
Power Off: Turns projector power off.
Freeze: The picture is paused.
Input (box): Click on the
button, and select the desired input from the pull-down
list.
Go: Switches to the input selected in the Input box.
Mute: Cuts off picture and sound. Click again to restore picture and sound.
Volume +/–: Adjust sound volume.
Resize Off Restores the picture to its original size.
Resize +/–: Adjusts the enlargement ratio.
: Move screen (up/down/left/right/diagonal)
5
To quit, click on the button on the Remote Control
window.
Performing this does not close the Network Utility window.
To exit both the Network Utility and the Remote Control, click on the
button on
the Network Utility window.
Using the Network Utility (Continued)
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba tdp tw420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba tdp tw420 in the language / languages: English as an attachment in your email.

The manual is 14,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info