214860
24
Zoom out
Zoom in
Previous page
1/47
Next page
47
Operations
46
<Subnet mask>: For dividing the network, the subnet mask determines the range
of an IP address assigned to a terminal. (Example: 255.255.xxx.xxx)
<Gateway>: Gateway specifies a network device like a router when accessing a
server outside the network. It is identified by an IP address. (Example:
111.112.xxx.xxx)
[Email]
<Status notification>: Sends alarm information to the specified E-mail address
when an error such as lamp blowout occurs.
<SMTP server>: Set an IP address of the SMTP server.
<Port number>: Enter a port number of the SMTP server.
<Destination address>: Enter within 60 characters. (Example: xxx@xxx.xxx)
[PJLink]
<PJLink authentication>: Set whether or not to authenticate the user by password
when the projector is accessed via the PJLink-compliant Software Application. (Set
[On] or [Off].)
<Password>: Enter a password for confirmation when the above <PJLink
authentication> is set to [On].
Precautions
When purchased, <PJLink authentication> is set to [Off] and <Password> is not
set by factory setting. You are recommended to make authentication setting as soon
as possible.
If you forget a password, set it again.
Character entry
Enter characters using numeric keys of the remote control.
The character is entered with a beep sound if the beep sound is set to [On].
Character entry mode
Remote
control
button
Items using characters, numbers, and symbols
(e.g., projector name and destination address)
Number only
“1” “. “@” “-” “_”
“2” “A” “B” “C” “a” “b” “c”
“3” “D” “E” “F” “d” “e” “f
“4” “G” “H” “I” “g” “h” “i”
“5” “J” “K” “L “j” “k” “l”
“6” “M” “N” “O” “m” “n” “o”
“7” “P” “Q” “R” “S” “p” “q” “r” “s”
“8” “T” “U” “V” “t” “u” “v”
“9” “W” “X” “Y” “Z” “w” “x” “y” “z”
“0” “space!"#$%&'()*+,-./:;<=>?@[]^_`{}~
Deletes one character.
“1”
“2”
“3”
“4”
“5”
“6”
“7”
“8”
“9”
“0”
Deletes one character.
Using the menus (Continued)
The control setting menu
This menu sets items regarding wired LAN.
By this setting, you can transmit operation status messages from the projector to the
specified E-mail address.
[ : Wired LAN setting] [ : Select item]
Projector name: Enter a character string (0 to 64 characters)
using numeric keys of the remote control.
DHCP: Use Not use
IP address: Enter a character string using numeric keys of the
remote control.
Subnet mask: Enter a character string using numeric keys of the
remote control.
Gateway: Enter a character string using numeric keys of the
remote control.
Confirm: [OK Cancel]
[ : E-mail setting] [ : Select item]
Status notification: On Off
SMTP server: Enter a character string using numeric keys of the
remote control.
Port number: Enter a character string using numeric keys of the
remote control.
Destination address: Enter a character string using numeric
keys of the remote control.
Confirm: [OK Cancel]
[ : PJLink setting] [ : Select item]
PJLink authentication: On Off
Password: Enter a character string (1 to 32 characters) using
numeric keys of the remote control.
Confirm: [OK Cancel]
Description
Item
Wired LAN
Email
PJLink
Detailed description
[Wired LAN]
<Projector name>: Setting a projector name helps you identify each of the
projectors that are connected to the network.
•You cannot set a projector name starting with ERR.
<DHCP>: When <DHCP> is set to [Use], an IP address is automatically assigned
to the projector by a DHCP server. In case of a network that an IP address cannot
be assigned automatically, set <DHCP> to [Not use].
When <DHCP> is set to [Not use], ask your network administrator for IP address,
subnet mask, and gateway, then set the following items manually:
<IP address>: This is a unique number assigned for a terminal to connect to a
network. The format is a quartet of 3-digit decimal number. (Example:
111.112.xxx.xxx)
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba tdp tw355 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba tdp tw355 in the language / languages: English as an attachment in your email.

The manual is 9,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info