214584
28
Zoom out
Zoom in
Previous page
1/47
Next page
55
Operations
54
Setting up the wireless LAN (Continued)
Details on individual items
[Easy Connect (USB)]
This feature allows users to easily connect the projector to a computer over wireless
networks, without making Network settings via Wireless Utility.
[Network settings]
<Mode>
Your projector is set to Ad hoc in the factory. Change the setting if you want to use the
projector in Infrastructure mode.
<Channel>
Usually, you do not have to set this item. If a network group having the same SSID
already exists in the projector’s coverage, the channel is changed automatically to the
channel of that network group.
Note 1: If a set channel is in bad connections for wireless connection, try the other
channels to avoid the effects of radio waves to select the one in possibly the
best communication conditions.
Note 2: To communicate in Ad hoc mode with a computer that cannot change the
channel, start up the projector before the computer.
<SSID>
This is an ID code for connecting to specific individuals over a wireless LAN. This may
also be called “Network groupor “Network name”. Please read the following carefully.
Note 1: The SSID is set to TDPJ when shipped from the factory. If you leave this setting
as it is, security may be compromised due to access by a third party using the
Wireless Utilitywithin the projector’s possible communication area. Before
using the projector, therefore, be sure to set SSID to a character string different
from the default.
Note 2: When you use the Ad hoc communication mode, if there is a similar SSID
network group (for example TDPJ, TDPJ1, TDPJ2, etc.) in the possible
communication area, it is possible that your projector name will not be dis-
played in the Wireless Utility projector list column. If this is the case, set SSID
to a completely different character string.
<Encryption>
Enable or disable encryption for security purposes.
Note: Encryption is factory-set to Off. If you use the projector with this setting left
unchanged, security may be compromised due to access by a third party using
the Wireless Utility within the projector’s coverage. Before using the projector,
therefore, be sure to set Encryption to On.
<WEP key>
When you have set Encryption to On, the WEP key must be set. For use at an
encryption level of 64-bit, specify a string of 5 arbitrary characters or a string of ten
characters in hexadecimal notation. For use at the 128-bit level, specify a string of 13
arbitrary characters or a string of 26 characters in hexadecimal notation.
Note: Alphabetic characters (A to F, a to f) used in hexadecimal notation are case
insensitive; the uppercase characters and their lowercase equivalents are
handled to be identical.
Setting Wireless Utility
If you select Wireless Utility, the following items can be set.
[Yes No] [Enter: ]
Mode: Ad hoc Infrastructure
Channel: Select a number (1 to 11) using the buttons.
SSID: Specify a desired character string (1 to 32 characters).
[ : Move left or right one character.] [ to :
Set a character.]
Encryption: On Off
WEP key: Specify a desired character string.
(5 to 13 characters, or 10 to 26 digits in hexadecimal notation)
[ : Move left or right one character.] [ to :
Set a character.]
DHCP: Use Not use
IP address: Enter using the numeric keys of the remote control.
[ : Move left or right one character.] [ to :
Set a character.]
Subnet mask: Enter using the numeric keys of the remote control.
[ : Move left or right one character.] [ to :
Set a character.]
Gateway: Enter using the numeric keys of the remote control.
[ : Move left or right one character.] [ to :
Set a character.]
Confirm: [OK] [Cancel] [Enter: ]
Reset all the network settings.
Confirm: [Yes] [No] [Enter: ]
Specify a desired character string (0 to 8 characters).
[ or : Enter setting mode.] [ : Select item.] [ :
Move left or right one character.] [ to : Set a character.]
Confirm: [OK] [Cancel] [Enter: ]
Specify whether to allow the remote control of the projector from a
computer.
Allowed Presentation Forbidden
Allowed: The projector always accepts remote commands
from a computer.
Presentation: Accepts only the remote commands from the
computer whose screen is currently displayed via
the projector (Update automatically) using Wireless
Utility.
Forbidden: Always ignores any remote commands from a
computer.
Browser authentication: Switch on/off the password
authentication for access to the setting screen using the
Projector Configuration Tool.
Password: Enter the password used to access the setting
screen when the Browser authentication is set to On. A
character string (1 to 8 characters) can be specified as desired.
[ : Move left or right one character.] [ to : Set a
character.]
Confirm: [OK] [Cancel] [Enter: ]
DescriptionItem
Easy Connect (USB)
Network settings
Setting
initialization
Projector
name
Remote
control
WEB browser
On Off
*To enter characters, use the numeric keypad on the remote control.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba tdp tw350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba tdp tw350 in the language / languages: English as an attachment in your email.

The manual is 12,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info