214450
37
Zoom out
Zoom in
Previous page
1/47
Next page
73
Operations
72
4
When the setting is complete, the connection is established. The
projector name of the connected projector or the MAC address of the
wireless LAN PC card is displayed.
This operation is allowed only when the Transmission mode is set to Ad hoc in the
projector network settings.
Profile
This feature allows the user to save the computer settings.
Web browser
Where the computer and the projector are connected over wireless LAN, bring up the
window of Projector Configuration Tool by pressing the Set browser button.
Precautions
If the page is not displayed correctly, re-select the projector.
When the network settings are changed, the network connection is disconnected. If
you wish to reconnect, set up the computer again.
Precaution
The simple 1:1 connection, the USB memory connection and the profile setting may not
work normally depending on the type of the wireless LAN PC card and the wireless LAN
embedded computer. When such a case arises, use the Wireless Utility menu to make
network settings manually
.
Operating the projector
This function can be used with any projector input.
Note, however, that this will not function with a memory PC card.
1
Launch the Wireless Utility software application.
The Screen Image transmission mode window appears on the computer’s screen.
4
Unplug the USB memory from the computer.
To unplug the USB memory, follow the instructions in the user s manual supplied
with the USB memory or the computer.
Setting on the projector
1
Turn the projector power on.
2
Insert the supplied wireless LAN PC card to the PC card slot.
3
Switch the input to Wireless/Card.
4
Plug the USB memory into the projector.
A message appears, notifying that the projector settings have been changed.
5
When the setting is complete, the connection is established. The
projector name of the connected projector or the MAC address of the
wireless LAN PC card is displayed.
Copying the computer settings to the projector
Setting on the projector
1
Turn the projector power on.
2
Insert the supplied wireless LAN PC card to the PC card slot.
3
Switch the input to Wireless/Card.
4
Plug the USB memory into the projector.
A message appears, notifying that the projector settings have been changed.
5
Select Config free (USB) in Wireless Utility settings from the Wireless/
Card menu and press the
button.
6
When a confirmation window appears, click Yes then press the
button.
The network settings are saved to the USB memory. When successfully saved, a
message appears.
7
Unplug the USB memory following the instruction in
p.49
.
Setting on the computer
1
Launch the Wireless Utility software
application.
2
Plug the USB memory into the computer.
3
After a confirmation message appears,
make settings.
Using the Wireless Utility (Continued)
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba tdp tw300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba tdp tw300 in the language / languages: English as an attachment in your email.

The manual is 6,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info