215806
24
Zoom out
Zoom in
Previous page
1/29
Next page
46 47
Maintenance
1
Unplug power cord.
2
Wait until lamp is suffi ciently cooled.
Wait for at least 1 hour.
3
Remove the outer lamp cover.
Loosen the 2 screws, raise the outer lamp cover
with your fingers as shown to remove the outer
lamp cover. Use care to avoid any damage to nails
and/or tip of your fi nger(s). If you have any diffi culty
in removal, you can use a screwdriver or any other
smaller tool for your convenience.
4
Remove the inner lamp cover.
Remove the screw and carefully set it aside, and
take off the inner lamp cover. Be sure not to loose
the screw.
5
Pull out the lamp.
Loosen the 3 lamp locking screws, pull up the
handle, and press the tab to remove the lamp.
6
Mount the new lamp.
Align the orientation, press down the new lamp until
the bottom is reached, and lock in place using the 3
lamp locking screws.
Inner lamp cover
Ta b
Lamp replacement (Continued)
7
Replace the inner lamp cover.
Tighten the screw removed in step
4
until the inner lamp cover is no longer loose.
8
Replace the outer lamp cover.
Align the cover, and press it in, then tighten the screws loosened in step
3
until the outer
lamp cover is no longer loose. (Be sure to replace the outer lamp cover.)
9
Reset the lamp time.
See the lamp’s manual for instructions on resetting the lamp time.
Notes and Precautions
The [Lamp time] item in the Status display menu indicates the time of lamp use (as a
rough guide)
p.43
Please replace the lamp after 2000 hours of use with [Lamp power] in the Default
setting 2 menu set to [Standard], and 3000 hours of use with [Lamp power] in the
Default setting 2 menu set to [Low].
p.42
There are cases that the lamp can not work before the above mentioned period expires
or before the replacement message is displayed.
Attach the outer lamp cover correctly so that it is not loose. If it is not attached correctly,
the projector may fail to be powered on or the lamp may fail to come on.
Always replace the lamp with a new one.
The lamp is made out of glass. Do not touch the glass surface with your bare hands,
bang it, or scratch it. (Dirt, jolts, scratches and the like could break the lamp.)
About lamp replacement messages
The lamp replacement message of this projector displays an appropriate
period according to the use period for [Standard] / [Low] of the [Lamp power]
respectively.
When the replacement time approaches, the message of “The lamp life is ending.
Please change the lamp. is displayed every time the power is turned on. This
display disappears when you press the
button.
Used Lamps
This projector’s lamps contain trace amounts of environmentally harmful inorganic
mercury. Be careful not to break used lamps, and dispose of them in accordance with
local regulations.
Outer lamp cover
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba tdp t420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba tdp t420 in the language / languages: English as an attachment in your email.

The manual is 7,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info