485605
24
Zoom out
Zoom in
Previous page
1/43
Next page
24
5
Projector placement angle adjustments
The placement angle and the height of the projected image can be adjusted by the foot
adjuster.
1
Lift up the front of the projector to
the desired angle, then press the
foot adjuster release button.
The foot adjuster extends. Release the
button to lock the position.
2
To adjust the horizontal angle, use the
tilt adjuster.
To stow the foot adjuster, hold up the projector while
pressing the foot adjuster release button, then slowly
lower the projector.
6
Adjusting the screen size and focus
1
Use the zooming lever to adjust the screen size.
2
Use the focusing lever to adjust the focus.
7
Adjusting the volume with the remote
control's Volume
Volume buttons
The speaker volume can be adjusted when an audio signal is being input.
Notes
Note that a lamp characteristics may rarely cause the brightness to fluctuate slightly.
•A lamp is consumable item. If used for extended periods, images will appear dark, and the lamp could
burn out. This is characteristic of a lamp, and is not malfunction. (The lifetime of the lamp depends on
conditions of use.)
The DMD
TM
is made using extremely advanced technology, but there may be black spots (pixels that
do not light) or bright spots (pixels that are constantly lit) on the panel. Please note that these are not
malfunctions.
Although this projector supports a wide range of RGB signals
p.40
, any resolutions not supported by
this projector (SVGA) will be expanded or shrunk, which will affect image quality slightly. To view high-
quality images, it is recommended that the computer’s external output should be set to SVGA (800 ×
600) resolution.
With some models of computer having LCD displays or the like, displaying images simultaneously on
the projector and the monitor’s display may prevent the images from displaying properly. If this happens,
turn off the computer’s LCD display. For information on how to turn off the LCD display, see the owners
manual of your computer.
If a signal not supported by the projector is input, the “For best image quality, lower image resolution.
” or “For best image quality, refresh rate.” will appear.
If no signal is being input from the connected device, the “Searching for source” will appear.
PUSH
1
2
2
1
2
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TDP-S9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TDP-S9 in the language / languages: English as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info