Manual Toshiba TDP-S21 (page 23 of 25) (English)

485552

Zoom out

Zoom in

1/25

Others

Maintenance

Operations

Preparations

Before Using

OWNER’S MANUAL

DATA PROJECTOR

TDP-S20 (SVGA)

TDP-S21 (SVGA / With Document Camera)

Before Using

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended

to alert the user to the presence of uninsulated "dangerous voltage" within the product's

enclosure that may be of sufficient magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

RESPONSIBLE PARTY: TOSHIBA AMERICA INFORMATION SYSTEMS, INC.

9740 Irvine Blvd., Irvine, CA 92618-1697 U.S.A

Phone: (949) 583-3000

WARNING: Changes or modifications made to this equipment, not expressly approved

by Toshiba, or parties authorized by Toshiba, could void the user’s authority

to operate the equipment.

Notice: This Class B digital apparatus complies with Canadian ICES-003. Cet appareil

numérique de la classe B est conforme à la norme NMB-003 du Canada.

FCC Radio Frequency Interference Statement

Note: This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses, and

can radiates radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct the

interference at his own expense.

WARNING: Changes or modifications made to this equipment, not expressly approved by

Toshiba, or parties authorized by Toshiba, could void the user’s authority to operate

the equipment.

Notice: This Class A digital apparatus complies with Canadian ICES-003. Cet appareil

numérique de la classe A est conforme à la norme NMB-003 du Canada.

WARNING: This is a Class A product. In a domestic environment this product may cause

radio interference in which case the user may be required to take adequate

measures.

USA only

CANADA only

USA only

FCC NOTICE: This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

USA only

CANADA only

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES

ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET.

REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

WARNING: Handling the cord on this product or cords associated with accessories sold with

this product, will expose you to lead, a chemical known to the State of California

to cause birth defects or other reproductive harm.

Wash hands after handling

WARNING: This [product] contains mercury. Disposal of mercury may be regulated due to

environmental considerations. For disposal or recycling information, please

contact your local authorities or the Electronic Industries Alliance: www.eiae org.

USA only

MODEL NAME: TDP-S20

TRADE NAME: DATA PROJECTOR MODEL NAME: TDP-S20

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

MODEL NAME: TDP-S21

USA only

SAFETY PRECAUTIONS

Before Using

USA only

Before Using

5. Heat

The product should be situated

away from heat sources such as

radiators, heat registers, stoves, or

other products (including

amplifiers) that produce heat.

6. Water and Moisture

Do not use this product near water.

- for example, near a bath tub,

wash bowl, kitchen sink, or laundry

tub; in a wet basement; or near a

swimming pool and the like.

7. Cleaning

Unplug this product from the wall

outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners.

Use a soft cloth for cleaning.

8. Power-Cord Protection

Power-supply cords should be

routed so that they are not likely to

be walked on or pinched by items

placed upon or against them,

paying particular attention to cords

at plugs, convenience receptacles,

and the point where they exit from

the product.

9. Overloading

Do not overload wall outlets;

extension cords, or integral

convenience receptacles as this

can result in a risk of fire or

electric shock.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND

INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND THOSE

MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE

REFERENCE.

This set has been designed and manufactured to assure personal safety. Improper use can

result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you

if you observe the following procedures for installation, use and servicing. This unit is fully

transistorized and does not contain any parts that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO

DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL ONLY.

1. Read Owner's Manual

After unpacking this product, read

the owner's manual carefully, and

follow all the operating and other

instructions.

2. Power Sources

This product should be operated

only from the type of power source

indicated on the marking label.

If you are not sure of the type of

power supply to your home,

consult your product dealer or

local power company.

For products intended to operate

from battery power, or other

sources, refer to the operating

instructions.

3. Source of Light

Do not look into the lens while the

lamp is on. The strong light from

the lamp may cause damage to

your eyes or sight.

4. Ventilation

Openings in the cabinet are

provided for ventilation and to

ensure reliable operation of the

product and to protect it from

overheating, and these openings

must not be blocked or covered.

The openings should never be

blocked by placing the product on

a bed, sofa, rug or other similar

surface. This product should not

be placed in a built-in installation

such as a bookcase or rack unless

proper ventilation is provided or

the manufacturer's instructions

have been adhered to.

Before Using

IMPORTANT SAFETY INSTRUCTIONS (Continued)

15. Accessories

Do not place this product on an

unstable cart, stand, tripod,

bracket, or table. The product may

fall, causing serious injury to a

child or adult, and serious damage

to the product. A product and cart

combination should be moved with

care. Quick stops, excessive

force, and uneven surfaces may

cause the product and cart

combination to overturn.

S3125A

16. Damage Requiring Service

Unplug this product from the wall

outlet and refer servicing to

qualified service personnel under

the following conditions:

a) When the power-supply cord or

plug is damaged.

b) If liquid has been spilled, or

objects have fallen into the

product.

c) If the product has been exposed to

rain or water.

d) If the product does not operate

normally by following the operating

instructions. Adjust only those

controls that are covered by the

operating instructions as an

improper adjustment of other

controls may result in damage and

will often require extensive work by

a qualified technician to restore

the product to its normal

operation.

e) If the product has been dropped or

damaged in any way.

f) When the product exhibits a

distinct change in performance -

this indicates a need for service.

17. If glass components,

including lens and lamp,

should break, contact your

dealer for repair service.

This product incorporates glass

components, including a lens and

a lamp. If such parts should

break, please handle with care to

avoid injury and contact your

dealer for repair service. The

broken pieces of glass may cause

to injury. In the unlikely event of

the lamp rupturing, thoroughly

clean the area around the

projector and discard any edible

items placed in that area.

18. Servicing

Do not attempt to service this

product yourself as opening or

removing covers may expose you

to dangerous voltage or other

hazards. Refer all servicing to

qualified service personnel.

10. Lightning storms

For added protection for this

product during storm, or when it is

left unattended and unused for

long periods of time, unplug it from

the wall outlet. This will prevent

damage to the product due to

lightning and power-line surges.

However, while it is thundering or

lightning, do not touch the

apparatus and any connected

cable and/or equipment.

This will prevent you from

receiving the electric shock by an

electric surge.

11. Object and Liquid Entry

Never push objects of any kind

into this product through openings

as they may touch dangerous

voltage points or short-out parts

that could result in a fire or electric

shock. Never spill liquid of any

kind on the product.

12. Do not place the product

vertically

Do not use the product in the

upright position to project the

pictures at the ceiling, or any other

vertical positions. It may fall down

and dangerous.

13. Stack Inhibited

Do not stack other equipment on

this product or do not place this

product on the other equipment.

Top and bottom plates of this

product develops heat and may

give some undesirable damage to

other unit.

14. Attachments

Do not use attachments not

recommended by the product

manufacturer as they may cause

hazards.

Before Using

8 9

If your line voltage is 220 to 240V, use one of the following types of cable.

Plug

configuration

Plug type

Australian

240V

10A

North American

240V

15A

Switzerland

240V

Line voltage

EURO

220 – 240V

200 – 240V

Plug

configuration

Plug type Line voltage

Use a 5A fuse which is approved by ASTA

or BSI to BSI362.

Always replace the fuse cover after

changing the fuse.

IMPORTANT PRECAUTIONS

Save Original Packing Materials

The original shipping carton and packing materials will come in handy if you ever have to

ship your projector. For maximum protection, repack the set as it was originally packed at

the factory.

Moisture Condensation

Never operate this unit immediately after moving it from a cold location to a warm location.

When the unit is exposed to such a change in temperature, moisture may condense on

the crucial internal parts. To prevent the unit from possible damage, do not use the unit for

at least 2 hours when there is an extreme or sudden change in temperature

Place and Manner of Installation

• Do not place in hot locations, such as near heating equipment. Doing so could cause

malfunction, and shorten the life of the projector.

• Avoid locations with oil or cigarette smoke. Doing so will dirty the optical parts,

shortening their lives, and darkening the screen.

• Do not use the product vertically in any upright position or slantwise in an angle of 20

degrees or more.

• Using this instrument near a TV or radio may cause interference to the images or audio

sound. If this happens, move it away from the TV or radio.

• Moving the projector from a low-temperature room to a high-temperature room may

cause condensation on the lens or internal parts in the instrument. If you continue to use

it in that situation, the malfunction may result. Ensure to wait until the condensation

naturally disappears.

• In a high altitude location where air is thin, cooling efficiency is reduced so use it with the

ambient temperature being lowered.

POWER SUPPLY CORD SELECTION

19. Replacement Parts

When replacement parts are

required, be sure the service

technician has used replacement

parts specified by the

manufacturer or have the same

characteristics as the original part.

Unauthorized substitutions may

result in fire, electric shock, or

other hazards.

(Replacement of the lamp only

should be made by users.)

20. Safety Check

Upon completion of any service or

repairs to this product, ask the

service technician to perform

safety checks to determine that

the product is in proper operating

condition.

21. Do not leave thermal-

paper documents or easily

deformed items on top of

the unit or near the air

exhaust for long periods

of time.

The heat from the unit could erase

the information on the thermal

paper, or cause deformation or

warping.

IMPORTANT SAFETY INSTRUCTIONS (Continued)

22. Do not get your hands

between the camera arm

and the main unit when

setting the camera arm

back in its original

position.

(Models equipped

with document camera)

To avoid injury, be careful not to

get your hands caught when

setting the camera arm back in its

original position.

Families with children should be

particularly careful.

23. Do not carry by the camera

arm.

(Models equipped with

document camera)

Do not carry the projector by the

camera arm. Doing so can result

in damage or injury.

24. Do not move the projector

while the arm is still erect.

(Models equipped with

document camera)

Always store the arm back in

position when moving the

projector. Otherwise injury or

damage may result.

25. Do not use the product in a

closed installation state.

Do not place the product in a box

or in any other closed installation

state. Otherwise it may overheat.

This could result in a risk of fire.

Before Using

10 11

EXEMPTION CLAUSES

• Toshiba Corporation bears no responsibility in the case of damages arising from natural

disaster such as earthquakes, lightning, etc., fire not liable to Toshiba Corporation,

operation, theft or mischief by third parties, other accidents, or use under abnormal

conditions including erroneous or improper operation and other problems.

• Toshiba Corporation bears no responsibility for incidental damages (lost profit, work

interruption, corruption or loss of the memory contents, etc.) arising from the use of or the

inability to use this unit.

• Toshiba Corporation accepts no liability whatsoever for any damages arising from not

having followed the descriptions in this Instruction Manual.

• Toshiba Corporation accepts no liability whatsoever for any damages arising from

malfunctions arising from combination with equipment or software that is not related to

Toshiba Corporation.

Copyrights

Showing or transmitting commercial imaging software or broadcast or cable-broad

casting programs with the purpose of other than the personal and private viewing,

including modifying images using the freeze or resize functions, or displaying with the

varying aspect ratio of the images, could violate the direct or indirect copyrights of the

imaging software or broadcast program, etc., if done without first consulting with the

one of the actions listed above, including obtaining a license from the copyright holder.

Disposal

This product contains substances which are harmful to humans and the environment.

• Solder used in the internal parts contains the lead.

• The lamp contains inorganic mercury.

Please dispose of this product or used lamps in accordance with local regulations.

Trademarks

• VGA, SVGA, XGA, SXGA, UXGA are trademarks or registered trademarks of

International Business Machines Corporation.

• Digital Light Processing, Digital Micromirror Device and DMD are trademakes of Texas

Instruments.

• Macintosh is a registered trademark of Apple Computer, Inc.

• Windows is a registered trademark of Microsoft Corporation in the U.S. and other

countries.

• Adobe is a registered trademark and Acrobat Reader is a trademark of Adobe Systems

Incorporated.

Notational Conventions Used in This Manual

• References to pages with related information are annotated as follows.

For example, if making a reference to page 36:

p.36

• The illustrations in this document are for reference purposes only and may not reflect

your package exactly.

REMOTE CONTROL BATTERIES

• Be sure to use AA size batteries.

• Do not reverse the polarity when inserting the battery.

• Do not recharge, heat, disassemble, short-circuit, or burn the battery.

• Do not use the battery beyond the expiration date indicated on the battery or leave a

dead battery in the remote control.

• Do not mix batteries of different types, such as alkaline and manganese. Do not mix new

and used batteries.

Using the batteries improperly may cause them to explode or leak and lead to burn or injury. If

battery-leaking fluid contacts skin, wash the fluid off immediately with clean water and consult a

doctor. If the fluid is spilt on an instrument, avoid contact and wipe it off using tissue paper.

(Dispose of the used tissue paper as flammable garbage after moistening with water.)

IMPORTANT PRECAUTIONS (Continued)

Avoid Volatile Liquid

Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or

plastic products touching the unit for a long time. They will leave marks on the finish.

If cleaning with a chemically saturated cloth, be sure to follow the product's precautions.

In the spaces provided below, record the Model and Serial No. located at the bottom of your

projector.

Model No. Serial No.

Retain this information for future reference.

OTHER CAUTIONS AND INFORMATIONS

Before Using

1312

CONTENTS

Before Using

SAFETY PRECAUTIONS .................................................................................. 2

IMPORTANT SAFETY INSTRUCTIONS ........................................................... 4

POWER SUPPLY CORD SELECTION ............................................................. 9

IMPORTANT PRECAUTIONS ........................................................................... 9

EXEMPTION CLAUSES .................................................................................... 10

OTHER CAUTIONS AND INFORMATIONS ...................................................... 11

REMOTE CONTROL BATTERIES .................................................................... 11

CONTENTS ....................................................................................................... 12

Preparations

Checking the package contents ......................................................................... 14

Names of each part on the main unit ................................................................. 15

Names of each part on the control panel and remote control ............................ 16

Parts on the rear panel ...................................................................................... 17

Names of each part on the document camera (TDP-S21) ................................ 18

Preparing and using the remote control ............................................................. 19

Placement .......................................................................................................... 20

Connection ......................................................................................................... 21

Operations

Turning the power on and off ............................................................................. 22

Basic operations ................................................................................................ 24

Using handy features ......................................................................................... 26

Using auto setting ........................................................................................... 26

Cutting off the picture and sound temporarily (Mute) ..................................... 28

Freezing the image (Freeze) .......................................................................... 28

Using the menus ................................................................................................ 29

How to use the menus.................................................................................... 29

The image adjustment menu .......................................................................... 30

The display setting menu ............................................................................... 31

The default setting menu ................................................................................ 32

Displaying Information (Status display) .......................................................... 33

Using the document camera .............................................................................. 34

How to use the document camera.................................................................. 34

Image projection with the document camera.................................................. 36

Locking the white balance .............................................................................. 37

Maintenance

About lamp ......................................................................................................... 38

Lamp replacement ............................................................................................. 38

Lens and main unit cleaning .............................................................................. 40

Others

Trouble indications ............................................................................................. 41

Before calling service personnel ........................................................................ 42

Specifications ..................................................................................................... 44

List of general specifications .......................................................................... 44

Document camera specifications (TDP-S21) ................................................. 44

List of supported signals (RGB signals) ......................................................... 45

List of supported signals (Y/P

B/PR signals) .................................................... 46

List of supported signals (Video, S-Video signals) ......................................... 46

Pin assignment of COMPUTER-1/2 & MONITOR terminals .......................... 46

CONTROL terminal ........................................................................................ 47

Separately Sold Product ................................................................................. 47

1514

Preparations

(8)

(6)

(5)

(3)(4)

(1)

(12)

(9)

(10)

(7)

(11)

(9)

(2)

Names of each part on the main unit

Name : Function

(1) Lens : Projects expanded image.

(2) Infrared remote sensor : Senses commands from the remote control.

p.19

(3) Foot adjuster release button : Press to stow the foot adjuster.

p.25

(4) Air exhaust : Expels air that has grown hot inside the projector.

(5) Control panel : Operates the projector.

p.16

(6) Zooming lever : Adjusts screen size.

p.25

(7) Air intake : Draws in air from outside the projector.

(8) Rear panel : Connects external devices.

p.17

(9) Tilt adjuster : Adjusts the projector’s horizontal tilt.

p.25

(

) Lamp cover : Remove to replace lamp.

p.39

(

) Foot adjuster : Adjusts the vertical projection angle.

p.25

(

) Focusing lever : Adjusts screen focus.

p.25

◆The Supplied CD-ROM

The supplied CD-ROM contains an owner’s manual, including information not available for

the printed Owner’s manual (Getting started) and Acrobat

Reader™ to view the manual.

■ Installing Acrobat

Reader™

Windows

: Run the CD-ROM, select the Reader/English folder, and run ar500enu.exe.

Follow the on-screen instructions.

Macintosh: Run the CD-ROM, select the Reader/English folder, and run Reader

Installer. Follow the on-screen instructions to install the software.

■ Viewing the manual

Run the CD-ROM and double-click on Start.pdf. Acrobat

Reader™ launches, and the

menu screen of the Owner’s manual appears. Click on your language. The Owner’s

Manual cover and list of bookmarks appear. Click on a bookmark title to view that

section of the manual. Click on

to view a reference page with related information.

See the Help menu for more information about Acrobat

Reader™.

■■ (1) Remote control

■■ (2) R6 (SIZE AA) batteries for remote control (2)

■■ (3) CD-ROM

■■ (4) Owner’s Manual

■■ (5) Power cord

(See note)

■■ (6) RGB cable (3m)

■■ (7) Carrying bag

■■ (8) RGB cable (25cm)*

*: Supplied with TDP-S21

Note

The shape and number of supplied power cords vary depending on the product destination.

Please make sure that the following items are included in the box, along with the main unit. If

any item is missing, please contact the store immediately where you purchased the product.

(1) (4) (7)

(2)

(5)

(3)

(6) (8)

Checking the package contents

Preparations

Back

Front

1716

Preparations

Note

• Although this owner’s manual abbreviates component video signals as Y/PB/PR, the

product also supports signals from video equipment marked “Y/C

B/CR.”

MONITOR

COMPUTER 2 IN

Y/P

(

)

AUDIO OUT

AUDIO IN

CONTROL

S-VIDEO

VIDEO

COMPUTER 1 IN

Y/P

(

)

(7)

(15) (13)(14) (12)

(4)

(5)(6)

(11)

(3)

(2)

(1)

(10)

(8)

(9)

Name : Main Function

(1) Infrared remote sensor : Senses commands from the remote control.

p.19

(2) S-VIDEO terminal : Input S video signals from video equipment.

(3) AUDIO (L/R) terminal : Input audio signals from video equipment.

(4) CONTROL terminal : When operating the projector via a computer, connect

this to the controlling computer’s RS-232C port.

p.47

(5) AUDIO OUT terminal : Outputs audio signals.

(6) MONITOR terminal : Connect to a computer display, etc.

(7) AC IN socket : Connect the supplied power cord here.

(8) Main power switch : AC power line ON (standby)/OFF.

(9) Speaker : Outputs audio sound.

(

) Antitheft lock hole : Attach a safety cable or any other antitheft device.

(

) VIDEO terminal : Input video signals from video equipment.

(

) AUDIO (L/R) terminal : Input audio signals from video equipment.

(

) COMPUTER 1 terminal : Input RGB signal from a computer or other source, or a

component video signal (Y/P

B/PR) from video

equipment.

(

) AUDIO IN terminal : Input audio signals from a computer or video

equipment with a component video signal output

terminal.

(

) COMPUTER 2 terminal : Input RGB signal from a computer or other source, or a

component video signal (Y/P

B/PR) from video

equipment.

For TDP-S21, use exclusively for document camera

connection.

Parts on the rear panel

Names of each part on the control panel and remote control

Control panel Remote Control

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(10)

(11)

FANLAMP

TEMP

(4)

(2)

(6)

(12)

(1)

(8)

(7)

(13)

(3)

Remote control

transmitter

Name : Main Function

(1) ENTER button : Accepts the selected mode.

(2) MENU button : Displays menus.

p.29

(3) SET UP button : Sets up image and mode.

p.26

(4) ON/STANDBY button : Turns the power on/off (standby).

p.22

(5) ON indicator : Displays whether power is on or off.

p.22

(6) INPUT button : Selects input.

p.24

(7) RETURN button : Goes back one screen.

(8) Selection button : Menu selections and adjustments,etc.

p.30

(9) LAMP indicator : Displays lamp mode.

p.23

(

) TEMP indicator : Lights when internal temperature too high.

p.41

(

)FAN indicator : Displays cooling fan mode.

p.41

(

) FREEZE button : Pauses image.

p.28

(

) MUTE button : Cuts off the picture and sound temporarily.

p.28

Note

• For the remainder of this manual, buttons are referred to as follows:

Selection buttons ⇒

; ENTER button ⇒

1918

Preparations

■ Operating the remote

control

Point the remote control toward the

projector’s infrared remote sensor,

and press a button on the remote

control.

• Operating the projector from the front

Approx. 15°

Approx. 5m

• Operating the projector from the rear

Approx. 15°

Approx. 5m

■ Loading dry-cell batteries

into the remote control

q Remove the battery cover.

w Insert the dry-cell batteries.

Be sure to align the plus and minus

ends of the batteries properly.

Two batteries (R6, SIZE AA) are used.

e Replace the battery cover.

Dry-cell batteries

• Before using the batteries, be sure to observe the Safety Precautions described in

previous pages.

• Remove batteries from remote control when not using for extended periods.

• If the remote control stops working, or if its range decreases, replace all the batteries with

new ones.

The remote control

• The remote control may fail to operate if the infrared remote sensor is exposed to bright

sunlight or fluorescent lighting.

• Do not drop or bang.

• Do not leave in hot or humid locations.

• Do not get wet or place on top of wet objects.

• Do not take apart.

• In rare cases, ambient conditions could impede the operation of the remote control. If this

happens, point the remote control at the main unit again, and repeat the operation.

Preparing and using the remote control

(6)

(7)

(8)

(9)

(12)

(10)

(4)

(2)

(3)

(1)

(11)(5)

Name : Function

(1) Camera head : Document camera.

(2) Camera lens : Shooting lens for the document camera.

(3) Focusing lever : Adjusts the focus.

(4) Camera arm : Adjusts the shooting angle.

p.36

(5) Lock lever : Used when the document camera is detached from the

tray.

(6) CAMERA button : Toggles between the camera input and previous input.

p.36

(7) CAMERA GAIN buttons : Adjusts the camera gain.

p.36

(8) Tip resistant bar : Pulled out when a camera is used separated from the

projector.

(9) Camera output terminal : Used connect the supplied document camera cable to

(CAMERA OUT) the COMPUTER IN (camera) terminal of the projector.

(

)Tray : The document camera is mounted.

(

)Lock lever : Locks the document camera onto the tray.

(

) Lock switch : Used when the document camera is attached/detached

to/from the tray.

Names of each part on the document camera (TDP-S21)

2120

Preparations

MONITOR

COMPUTER 2 IN

Y/P

(

)

AUDIO OUT

AUDIO IN

CONTROL

S-VIDEO

VIDEO

COMPUTER 1 IN

Y/P

(

)

p.47

Before connection

• Read the owner’s manual of the device you are connecting to the projector.

• Some types of computer cannot be used or connected to this projector.

Check for an RGB output terminal, supported signal

p.45

, etc.

•Turn off the power of both devices before connecting.

• The figure below is a sample connection. This does not mean that all of these devices

can or must be connected simultaneously. (Dotted lines mean items can be exchanged.)

Notes

• COMPUTER terminals 1 and 2 function identically.

• For TDP-S21, the document camera should be connected to COMPUTER terminal 2.

• The AUDIO IN terminal doubles for devices connected to COMPUTER terminals 1 and 2.

Connection

To audio

output

To RGB

output

Control cable

To RS-232C terminal

RGB cable

(not supplied)

To Y/CB/CR output

Green (Y)/Blue (C

B)/Red (CR)

VCR

S-Video cable

(not supplied)

Video cable

(not supplied)

To S-Video

output

To audio output

White (L)/Red (R)

Computer

(for control)

Conversion adapter BNC-pin

(not supplied)

Monitor cable Mini D-sub

15P-BNC

(not supplied)

Audio cable

(not supplied)

Video recorder,

DVD player, etc.

Projection Distance and Size

Use the figures, tables, and formulas below to determine the projection size and projection distance.

(Projection sizes are approximate values for full-size picture with no keystone adjustment.)

Placement Styles

As shown in the figures below, this device can be placed in 4 different styles.

The factory setting is “floor-mounted front projection.” Set the Projection mode in the

default setting menu

p.32

, in accordance with your needs.

Placement

Floor-mounted front projection

WARNING

• Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing the unit.

Attempting to clean/replace the lamp at a high site by yourself may cause you to drop down, thus

resulting in injury.

• If you wish to mount the projector on the ceiling, be sure to ask your dealer to do so. Mounting the

projector on a ceiling requires special ceiling brackets (sold separately) and specialized knowledge.

Improper mounting could cause the projector to fall, resulting in an accident.

• If the projector is ceiling-mounted, install the breaker for turning off the power in case of anomaly. Let

everyone involved with the use of the projector know that fact.

Floor-mounted rear projection

Ceiling-mounted front projection Ceiling-mounted rear projection

a is the distance (m) between the lens and the

screen, and corresponds to a range of 1.15 m to

10.00 m. H is the height from the image bottom to the

center of the lens.

Screen

As seen from above

Lens center

As seen from the side

a (min length) =

projection size (inches) – 1.516

29.85

a (max length) =

projection size (inches) – 1.264

24.88

Audio amplifier, etc.

To audio

output

White (L)/

Red (R)

DVD video recorder, etc.ComputerComputer

RGB cable

(supplied with

TDP-S21)

Audio cable

(not supplied)

RGB cable

(supplied)

To RGB

output

Audio cable

(not supplied)

To audio input

White (L)/Red (R)

AV cable

(not supplied)

To audio

output

To video

output

Document camera

projection

projection distance a (m)

height (H)

min length max length

size (inches)

(zooming max) (zooming min)

(cm)

30 — 1.15 5.5

36 1.15 1.40 6.6

40 1.29 1.56 7.3

60 1.96 2.36 11.0

80 2.63 3.17 14.6

100 3.30 3.97 18.3

150 4.97 5.98 27.4

200 6.65 7.99 36.6

250 8.32 10.00 45.7

300 10.00 — 54.9

Operations

■ Connecting the power cord

Insert the power cord connector into the

AC IN socket of the projector.

Insert the power cord plug into a wall or

other power outlet.

■ Turning the power on

Turn on the main power switch

The ON indicator will change to

orange, indicating standby mode.

Press the ON/STANDBY

button.

The power turns on, and the following

3 green indicators light: ON, LAMP,

and FAN. After a moment, the start-up

screen appears.

Start-up screen

Control panel

Remote

Control

Notes

• The start-up screen will disappear after a moment. You can dismiss the start-up screen

before this by performing any operation. You can also configure the start-up screen not to

appear via the Display setting menu

p.31

• The first time you use the projector after purchase, after the start-up screen disappears,

the Language menu is displayed

p.24

■ Turning the power off

Press the ON/STANDBY button.

A message appears on the screen, confirming that you wish to shut off the power. This

message will disappear after a moment. (This operation is no longer valid after the

message disappears.)

Press the ON/STANDBY button again.

The screen turns off, but the internal cooling fan continues to operate for a short while.

Then, the projector goes into standby mode.

When cooling lamp During internal cooling After cooling complete

(Orange) (Orange)

(Green)

(Off)

(Orange)

B C

Flashing

(Green)

(Off)

LAMP

TEMP

FAN

LAMP

TEMP

FAN

LAMP

TEMP

FAN

During cooling, the LAMP indicator flashes. In this state, the power cannot be

turned back on.

After the LAMP indicator goes off, the cooling fan continues to operate for a

short while, in order to expel excess internal heat. If you are in a hurry, there is

no problem with unplugging the power cord or turning off the main power switch

in this state.

In standby mode

Note

• The projector consumes about 6W of power in standby. We recommend that you unplug

the power cord or turn off the main power switch if you will not be using the projector for

an extended period.

PRECAUTION

• If the power cord is unplugged before cooling is complete, give the lamp time (about 5

minutes) to cool before plugging it back in. If the lamp overheats, it may fail to light, and

its lifetime will be shortened.

(Orange)

LAMP

TEMP

FAN

(Supplied) Power cord connector

CAUTION

• Do not look into the lens while the lamp is on. The strong light from the lamp may cause

damage to your eyes or sight.

• Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheating.

• Do not place your hands, face, or other objects near the air exhaust. Doing so could cause

burns, deform/break the object.

■ Removing the lens cover

Be sure to remove the lens cover when the power is

turned on. If it is left on, it could become deformed due

to heat.

Turning the power on and off

Operations

Turn on the power.

Turn on the power by following the instructions in “Turning on the power”

p.22

Select the language and the lamp power (When using the

first time).

When the projector is used for the first time after purchase, menu for language and

lamp power selection and configuration is displayed in English. (If the screen is out of

focus, adjust it according to the step

q Use the or button to select the

desired language and press the

button.

Message for setup confirmation is displayed in a

selected language.

Then, the menu for lamp power selection and

configuration is displayed. It is automatically set as

Standard. To change the setting, follow the step w.

w Using the or button, select Standard

or Low for the lamp power (menu item)

and press the

button.

The lamp power, if selected, will be toggled without

pressing the

button. The display automatically

disappears in a few seconds.

Notes

• When the projector is turned on the next time, the Language and Lamp power

menus do not appear upon startup. However, if “Reset all” is executed from the

Default setting menu

p.32

, the Language and Lamp power menus will be

displayed the next time when the power is turned on.

• The language can also be set via the Display setting menu

p.31

and Lamp power

via the Default setting menu

p.32

• This owner’s manual assumes that English has been selected.

Activate the connected device.

Turn on and start the connected device such as a computer.

Press the INPUT button.

An image of the connected equipment is projected.

Each time you press the INPUT button, it switches to the input of the connected

equipment.

Basic operations

Notes

• When [Auto input search] is set to [On] in the default setting menu

p.32

, the image

of the equipment which is connected and turned on is projected.

• Moving pictures generated with the DVD software for computers may appear unnatural if

it is projected with this projector, but it is not a malfunction.

English

Français

Português

Deutsch

Italiano

Español

................

..............

................

...............

..........

...............

..............

................

.................

.......

...................

Russian

Swedish

English

French

German

Italian

Spanish

Portuguese

Russian

Swedish

Tur kish

Japanese

Chinese (simplified)

Chinese (traditional)

Korean

Türkçe

Projector placement angle adjustments

The placement angle and the height of the projected image can be adjusted by the foot

adjuster.

q Lift up the front of the projector to

the desired angle, then press the

foot adjuster release button.

The foot adjuster extends. Release the

button to lock the position.

w Turn the foot adjuster to fine-tune

the angle.

e To adjust the horizontal angle, use

the tilt adjuster.

To stow the foot adjuster, hold up the projector while pressing the foot adjuster

release button, then slowly lower the projector.

Adjusting the screen size and focus

q Use the zooming lever to adjust the screen

size.

w Use the focusing lever to adjust the focus.

Adjusting the volume with the buttons

The speaker volume can be adjusted when an audio signal is being input.

Notes

• Note that a lamp characteristics may rarely cause the brightness to fluctuate slightly.

•A lamp is consumable item. If used for extended periods, images will appear dark, and

the lamp could burn out. This is characteristic of a lamp, and is not malfunction. (The

lifetime of the lamp depends on conditions of use.)

• The DMD

is made using extremely advanced technology, but there may be black spots

(pixels that do not light) or bright spots (pixels that are constantly lit) on the panel. Please

note that these are not malfunctions.

• Although this projector supports a wide range of RGB signals

p.45

, any resolutions not

supported by this projector (SVGA) will be expanded or shrunk, which will affect image

quality slightly. To view high-quality images, it is recommended that the computer’s

external output should be set to SVGA (800 × 600) resolution.

•With some models of computer having LCD displays or the like, displaying images

simultaneously on the projector and the monitor’s display may prevent the images from

displaying properly. If this happens, turn off the computer’s LCD display. For information

on how to turn off the LCD display, see the owner’s manual of your computer.

• If a signal not supported by the projector is input, the “Unsupported signal” will appear.

• If no signal is being input from the connected device, the “No signal” will appear.

• If an unavailable operation button is pressed, the

icon will appear.

Operations

■ Using auto setting

This function sets up the projector to the optimum state for

each type of the input signal by using simple operations.

Press the SET UP button.

The Set up menu appears.

Press the SET UP button again.

The menu item is automatically adjusted/set.

For computer input, the

icon will appear during

processing.

For manual adjustment and setting, see the following table

p.27

Notes

• The image may not be projected or auto adjustment/setting may not be performed

correctly for input signals other than those supported by the projector

p.45

p.46

•Keystone adjustment cannot be corrected automatically.

● Correcting the keystone distortion

When the foot adjuster

p.25

is used to change the projector placement angle while

projecting the image, the picture will undergo keystone (trapezoidal) distortion.

This projector is capable of correcting this keystone distortion

● Manual adjustment

Press the SET UP button to display the Set up menu and select [Keystone]. Use

the

buttons for keystone adjustment. When the adjustment is finished, press

the RETURN button. The menu disappears.

Notes

• Depending on the amount of keystone adjustment and the content of images, some

information may be lost, or the picture quality may suffer.

•Keystone adjustment is available for the keystone distortion in a slant angle of ±15

degrees.

• Keystone adjustment will not change the shape of the menus, the start-up screen,

and the background (with no signal input).

Using handy features

Control panel

Remote

Control

Before correction

After correction

● Manual adjustments and settings

The menu items of the Set up menu vary depending on the input type, as shown in

the table below.

Use the

buttons to adjust the items in the table below, then press

the RETURN button when you are finished.

Select Item Description

Computer Camera

Y/PB/PR

Video

S-video

Keystone Correct the keystone (trapezoid) distortion of the

screen.

Screen shrinking Screen shrinking

downward upward

Auto setting

Automatically adjusts items such as the sampling

phase depending on the type of input signal.

Press the SET UP button.

Phase Adjust with to eliminate flicker.

Frequency Adjust with to eliminate periodic patterns

and flickering when many vertical lines appear

on the screen.

H-position Adjust the horizontal position of the image.

Move left Move right

V-position Adjust the vertical position of the image.

Move down Move up

Clamp 1 Adjusts the clamp pulse position.

Lower Higher

Clamp 2 Adjusts the clamp pulse width.

Narrower Wider

Ye s Ye s Ye s Ye s

Ye s N o N o N o

Operations

Using handy features (Continued)

■ Cutting off the picture and sound temporarily (Mute)

When you want to project the images of another projector, overhead

projector, etc. temporarily, this projector’s images and sound can be

turned off.

Press the remote control’s MUTE button.

The picture and sound are cut off. (The Mute function is released

when pressing the MUTE button again.)

Notes

• The icon will appear while mute is in effect.

• Operating any other functions will also cancel the muting.

■ Freezing the image (Freeze)

The image being projected can be made to be frozen. This function is to

be used to pause a video during a presentation, etc.

Press the remote control’s FREEZE button.

The picture pauses. (The Freeze function is released when pressing

the FREEZE button again.)

Notes

• The icon will appear while freeze is in effect.

• Other operation will also release the freeze.

•Even if an image is frozen on the projector, the pictures are running on the video or

other equipment.

• If you use this function on video software sold on the market, broadcast or

broadcast on cable except for the purpose of your private viewing and listening, it

may infringe the copyright protected by the copyright laws.

Remote

Control

Remote

Control

You can call up on-screen menus, and conduct a number of adjustments and settings using

the operation buttons

p.16

on the control panel (main unit side) and remote control.

■ How to use the menus

The menu shown below is for operation instructions purposes and might differ from the

actual display.

Using the menus

Note

• Menu adjustments and settings are saved when the power is turned off via the ON/

STANDBY button. If the power cable is disconnected before this, or the power goes out,

then the data will not be saved.

Display the Setting display menu

The menu disappears.

1. Press the MENU button

2. Select a Category

3. Adjustments & Settings

4. Back

5. End

Press the MENU

button

Select a category by using

There are following four

categories:

Displays the current

adjustments and settings of

selected category.

Item shown with gray cannot

be adjusted with the current

input source.

p.30

Image adjustment menu

p.31

Display setting menu

Default setting menu

p.32

Status display menu

p.33

The figure shows displays given for operation instructions purposes. As the display

may differ depending on the item, use the following pages as a reference.

Item

Adjustment/Setting Value

These marks signify the

items can be adjusted/set

by using .

These marks signify the items can

be selected from the list by using

After an item is selected, apply it

by pressing .

Press to open the menu.

This mark signfy that

there are options.

Press to display a

list of options.

Operations

■ The image adjustment menu

Use this menu to adjust image-related items.

Items that can be adjusted are marked with “Yes”, and those that cannot are marked with “No”.

Item Description

Computer

Y/PB/PR

Video

Camera

S-video

Contrast Adjust the image contrast. Yes Yes Yes Yes

Lower

Higher

Brightness Adjust the brightness of the image. Yes Yes Yes Yes

Darker

Brighter

Color Adjust the color of the image. No Yes Yes No

Lighter

Deeper

Tint

Adjust the tint of the image color. No No Yes No

Reddish

Greenish

Sharpness Adjust the sharpness of the image. No Yes Yes Yes

Softer

Sharper

Noise Set the function to reduce screen noise. No Yes Yes No

reduction

On (Enable)

Off (Disable)

Picture Press . Toggle the picture mode with Yes Yes Yes No

mode

/ .

Bright/Standard/True color

R-level Adjust red of the image color. Yes Yes Yes Yes

Less red

More red

G-level Adjust green of the image color. Yes Yes Yes Yes

Less green

More green

B-level Adjust blue of the image color. Yes Yes Yes Yes

Less blue

More blue

NTSC mode

Set the black level with / button. No No Yes No

US: NTSC (US) mode

Japan: NTSC (JAPAN) mode

Shutter Set the shutter speed of the camera to No No No Yes

the local power frequency.

(TDP-S21) 50 Hz

60 Hz

White Set the white balance of the document No No No Yes

balance

camera.

(TDP-S21) Auto

Lock

*1: [Tint] and [NTSC mode] can be displayed and adjusted only when the video signal is set to

[NTSC] and [NTSC4.43]. (NTSC mode is set to JAPAN when the language is set to Japanese. It is

set to US for other languages.)

*2: Even if the white balance is set to [Lock], turning the projector off disables this function and

turning it on again the next time resets the menu to [Auto]. (TDP-S21)

Using the menu (Continued)

■ The display setting menu

Use this menu to set screen display-related items.

(Full): Display with 800 × 600 dot resolution

(Thru):

Display with sampling resolution (for computer/camera input)

(Wide): Wide-screen display (for Video, S-video, and Y/P

)

Select one of the languages below to use for displaying the menu and messages

[ : Enter setting mode] [ :Selection] [Apply: ]

English/Français/Deutsch/Italiano/Español/Português/Russian/

Swedish/Türkçe/ / / /

Screen to display when there is no input signal

(Logo) (Blue) (Black)

Display icons as function guides On Off

Display start-up screen when power is turned on On Off

Description

Item

Screen size

Note

• If “Thru” is selected for screen size, portions exceeding the native resolution (800 × 600

pixels) will not appear on the screen. Note that for RGB signals with clock frequency

110MHz or lower, all input pixel signals are sampled. However, if the clock speed is

higher than this, the RGB pixel signal is thinned before sampling.

Operations

Using the menu (Continued)

■ Displaying Information (Status display)

This displays information about the input signal, lamp use time, etc.

“Yes”: displayed, “No”: not displayed

Item Description

Computer Y/PB/PR

Video

Camera

S-video

Input Input source name Yes Yes Yes Yes

Mode name RGB input mode

[Note 1]

Yes No No No

H-resolution Horizontal resolution (in dots) Yes No No No

V-resolution Vertical resolution (in dots) Yes No No No

H-frequency Horizontal sync frequency Yes No No No

V-frequency Vertical sync frequency

[Note 2]

Yes No No N o

Sync Sync signal polarity

[Note 3]

Yes No No N o

Signal format Y/PB/PR signal format No Yes No No

Video mode Color method of video signal No No Yes No

Lamp time Time of lamp use

[Note 4]

Yes Yes Yes Yes

Lamp reset count The count for lamp replacement Yes Yes Yes Yes

Total time

The total time that this projector is used

Yes Yes Yes Yes

Version Firmware version

[Note 5]

Yes Yes Yes Yes

Notes

1: The mode of supported RGB signals

p.45

is shown.

2: Same as the refresh rate of the computer signal.

3: Sync signal polarity shown as P (positive) or N (negative) for [H/V].

4: Displays [Lamp time] as a measure of when the lamp should be replaced. (Cannot be used as

a counter of guaranteed lamp time.) When the displayed time approaches 3,000 hours, consult

with a store about getting a TLPLV4 replacement lamp (sold separately) prepared.

5: [Version] shows the version of the projector’s internal control program. This version is referred

to for customer service, etc.

Note

• The displayed information will not be refreshed if the status changes. To refresh the

information, dismiss the display, then display it again.

■ The default setting menu

This menu shows placement status and other settings.

Sets projection mode in accordance with Placement Style.

Set the timer to wait for the power to be turned off after signal input stops.

Press . Switch with and .

Off (not turned off)/1 min./5 min./10 min./30 min./60 min.

Set whether the input with signals is only selected or not.

Sets whether to turn on the power when the ON/STANDBY button is pressed

(Manual), or when the power cord is plugged in (Auto). Manual Auto

Sets the lamp power.

Sets the cooling fan speed.

Press .

Resets all adjustments and settings to their factory settings.

Description

Item

Projection

mode

No signal

power off

Auto input

Power on

Lamp power

[Note 1]

Fan mode

[Note 2]

Reset all

(Rear mounted

from ceiling)

(Standard)

(Rear)

(Mounted

from ceiling)

On Off

Standard High

Yes No

Low Standard

p.20

Notes

1: When Lamp power is set to Low, the screen becomes a little darker, but the cooling fan noise gets

quieter. This setting will be cleared when you turn the power off.

2: Setting [Fan mode] to [High] increases the cooling fan speed. Set this option to use the projector,

for example, at high altitude (over 1,500 meters above sea level).

Notes

•

Note that in the event of a power outage but the power is restored afterwards, the projector

power will come on if Power on is set to Auto, and the power cord is plugged in.

• When you turn off the projector even if Power on is set to Auto, you must press the ON/

STANDBY button to turn the power off.

Operations

Using the document camera

Please read this chapter if the model you purchased is TDP-S21 which includes a document camera.

■ How to use the document camera

Using the camera attached on the projector

PRECAUTIONS

• For camera interconnection, be sure to use the supplied RGB cable (25 cm or 3 m). If you

use the other cables, the normal operation may not be achieved and even the malfunction

may result.

• When moving the projector with the camera attached, do not grab the camera arm and/or

the camera head.

•

When moving the projector with the camera attached, first ensure that the camera is securely

locked in position on the tray

• Insert the RGB cable straight and securely until it is fixed in place.

• Do not jolt or force the camera head or camera arm. Doing so could cause malfunction.

• Note that when extending or rotating the camera arm, the arm moves in an arc. Take care

not to bump yourself or others with it.

• When placing the projector in the carrying bag, remove the connection cables. Otherwise,

damage to the connectors and cables may result.

Status before preparation

(When stored)

1) Set up arm. 2) Rotate arm.

3) Raise camera head.

Using the camera removed from the projector

PRECAUTIONS

• Installation of the document camera onto the tray should be performed in the reverse

order shown above.

• When replacing the document camera on the tray, ensure that the lock lever is securely

locked in position.

• When using the tip resistant bars, pull them fully until each forms the angle of 90 degree.

If you don’t use the bars, the camera may topple over.

Status before preparation

(When stored)

1) Disconnect the RGB

cable, then slide the

lock switch to release

lock.

2) While pushing the lock

lever in the arrow

direction, lift up the

document camera.

4) Extend the tip resistant

bars to set the

document camera.

5) Connect the document

camera and the

projector using the

supplied RGB cable.

3) Remove the document

camera from the tray.

Pull up toward direction

Operations

■ Image projection with the document camera

Place the document.

Set the document at the side of the projector

Press the CAMERA button, and select camera input.

• The input returns to the previous input when the CAMERA button

is pressed again.

• Camera input can also be selected by pressing either the remote control or projector’s

INPUT button.

Rotate the camera head to align the orientation of the document for

shooting by checking the screen.

Move the camera arm up and down to adjust the image size.

• Closeup shot with the distance shorter than 100 mm cannot be performed.

Adjust the focus using the focusing lever on the camera head

Focusing lever

Rotate the focusing lever to either NEAR or

FAR, whichever is better in focusing.

• Near : 100 mm to 300 mm

Far : 300 mm to 5 m

Using the document camera (Continued)

Farther (↑): Smaller image

Closer (↓): Larger image

If the screen is too dark or too bright, use the CAMERA GAIN (+/–)

buttons to make it easier to see.

The Sharpness of the camera image can also be adjusted using

the Image adjustment menu

p.30

After use, fold up the document camera.

Fold up the camera using the reverse order from unfolding the document camera

p.34

Notes

• There is no audio output when camera input is selected.

• If the room’s fluorescent lighting causes the image to flicker, either turn off the fluorescent

light, or set the Shutter from the Image adjustment menu

p.30

. Note that changing the

Shutter setting may not eliminate the flicker, depending on the lighting, state of the

document, or image adjustment.

■ Locking the white balance

Although the projector’s camera is constantly adjusting the color balance of the images

it photographs, the color balance may be disrupted, depending on the color layout of

the document. If this happens, the white balance can be locked using the procedures

below.

Lay down a piece of white paper, and adjust so it fills the screen.

Adjust the camera head and arm so that the white

paper fills the screen completely.

Set the White balance to Lock in the Image adjustment menu.

p.30

The white balance is locked. If you want to return to the auto adjustment, set the White

balance to Auto in the Image adjustment menu.

Notes

• If the white balance is set to Lock, once power is turned off, the setting goes back to

Auto.

• The color of the room lighting may prevent the white balance from being adjusted to the

optimum level. In this situation, or if you want to use a certain tinting, adjust the R-level,

G-level and B-level on the Image adjustment menu

p.30

Maintenance

Unplug power cord.

Wait until lamp is sufficiently cooled.

Wait for at least 1 hour.

Remove the lamp cover.

Loosen the 2 screws, then pull up to the

direction of the arrow with your fingers as

shown to remove the lamp cover. Use care to

avoid any damage to nails and/or tip of your

finger(s). If you have any difficulty in removal,

you can use a screwdriver or any other smaller

tool for your convenience.

Pull out the lamp.

Loosen the 2 screws holding the lamp in place,

and pull up the handle to remove the lamp.

Mount the new lamp.

Align the orientation, press down until the bottom is

reached, and lock in place using the two lamp

locking screws.

Replace the lamp cover.

Align the cover, and press it in, then tighten the

screws loosened in step

until the lamp cover is

no longer loose.

Reset the lamp timer.

See the lamp’s manual for instructions on resetting

the lamp timer.

Notes and Precautions

• Press the

button twice to display (a rough guide) the time of lamp use, the Lamp time

item, in the Status display menu.

p.33

• It is recommended that the lamp be replaced after 3,000 hours of use. When Lamp time

reaches 3,000 hours, the

icon and a message will appear. This display disappears

when you press

button.

• Attach the lamp cover correctly so that it is not loose. If it is not attached correctly, the

lamp may fail to come on

p.41

, and the lamp’s lifetime may be shortened.

• Always replace the lamp with a new one.

• The lamp is made out of glass. Do not touch the glass surface with your bare hands,

bang it, or scratch it. (Dirt, jolts, scratches and the like could break the lamp.)

Lamp cover

About lamp

Maintenance

The product’s light source is a mercury lamp that lights at increased internal pressure. Be sure

to fully understand the following characteristics of the lamp and handle it with extreme care.

• The lamp may explode with a loud noise due to impact or deterioration, or fail to light at

the expiration of its life.

•How long it takes before the lamp explodes or the life expires may vary greatly by lamp.

Some may explode shortly after first use. (Free replacement is available if the lamp

explodes within the warranty period. Contact the dealer from whom you purchased the

product in such a case.)

•

Explosion is likely to happen if the lamp is used after the replacement period has elapsed.

• When the lamp explodes, the broken pieces of glass may get inside the product or be

released outside from the openings for ventilation.

• When the lamp explodes, a slight amount of mercury gas enclosed in the lamp along

with glass dust may be released from the openings for ventilation.

■

Immediately replace the lamp when a sign appears on the screen.

• When the replacement time approaches, a message will appear on the screen.

•

The risk of explosion will increase if the lamp is continuously used without being replaced.

•Frequently check the used hours and prepare spares when the replacement time

approaches. (Refer to “Status display”.

p.33

)

■

When the lamp is broken

• If glass components, including a lamp and a lens, should break, handle the broken

pieces with care to avoid injury and contact your dealer for repair service.

• In the event of lamp explosion, unplug the product from the wall outlet, leave and

completely ventilate the room. Then, thoroughly clean the area around the projector and

discard any edible items placed in that area.

• When the lamp explodes, consult a doctor if glass dust or mercury gas gets into your

eyes or you breathe it.

Lamp replacement

A lamp is consumable supplies. If used for extended periods, images will appear dark, and

the lamp could burn out. This is characteristic of a lamp, and is not malfunction. (The lifetime

of the lamp depends on condition of use.) If this happens, replace it with a new one

WARNING

•

If the projector is mounted on a ceiling, request a lamp replacement from your projector dealership.

• When replacing, always use lamp “TLPLV4” (sold separately).

CAUTION

•

If you have been using the projector, the lamp will be very hot, and may cause burn injuries

Wait for the lamp to cool (for longer than 1 hour) before replacing it.

•

If the lamp should break, please handle with care to avoid injury due to broken pieces and

contact your dealer for repair service.

Others

LAMP

TEMP

FAN

The indicator lights inform you of internal abnormalities.

No power

⇒ Problem with projector

• Unplug the power cord, and contact your dealer.

Lamp went out during use, or won’t come on

⇒ Lamp temperature is high so that it is difficult to turn on, the lifetime of

the lamp has ended or the projector is malfunctioning.

•

Unplug the power cord and wait for a short while, then turn the power back on.

• If a lamp burns out, replace it with a new one.

❈ After approx. one minute of abnormal display, the projector returns to

the standby state waiting for internal cool down.

Power went out during use

⇒ Internal overheating, or the outside temperature is too high.

• Place the projector so that the air intake and exhaust are not blocked.

•

Unplug the power cord and wait for a short while, then turn the power back on.

❈ The icon will appear before the power goes out.

❈ After approx. one minute of abnormal display, the projector returns to

the standby state waiting for internal cool down.

Power went out during use

⇒ Problem with internal cooling fan.

• Unplug the power cord, and contact your dealer.

❈ The

icon will appear before the power goes out.

❈ After approx. one minute of abnormal display, the projector returns to

the standby state waiting for internal cool down.

Power went out during use, or power won’t come on

⇒ The lamp cover is not properly attached.

• Unplug the power cord, and reattach the lamp cover.

p.39

❈ After approx. one minute of abnormal display, the projector returns to

the standby state waiting for internal cool down.

Power went out during use

⇒ Problem inside the projector.

•

Unplug the power cord and wait for a short while, then turn the power back on.

• If the above action will not clear the problem, unplug the power cord,

and contact your dealer.

❈ After approx. one minute of abnormal display, the projector returns to

the standby state waiting for internal cool down.

Power went out during use

⇒ Camera is not correctly connected.

•

Disconnect the power plug and check the connection with the camera

❈ The

icon will appear before the power goes out.

❈ After approx. one minute of abnormal display, the projector returns to

the standby state waiting for internal cool down.

PRECAUTION

• Make sure to unplug the power cord if something goes wrong.

LAMP

TEMP

FAN

LAMP

TEMP

FAN

LAMP

TEMP

FAN

(Off)

Or (Orange lit)

(Orange lit)

(Red lit)

LAMP

TEMP

FAN

LAMP

TEMP

FAN

Trouble indications

Others

TDP-S21

(Red lit)

(Green lit)

(Red lit or flashing)

(Red lit)

(Red lit or flashing)

(Orange

flashing)

(Red lit)

(Green lit

or Off)

(Green

flashing)

(Green lit

or Off)

LAMP

TEMP

FAN

(Red lit)

(Green lit)

Used Lamps

This projector’s lamps contain trace amounts of environmentally harmful inorganic

mercury. Be careful not to break used lamps, and dispose of them in accordance with

local regulations.

Lens and main unit cleaning

WARNING

•

Request cleaning and maintenance of a ceiling-mounted unit from your projector dealership

Attempting to clean/replace the lamp at a high site by yourself may cause you to drop

down, thus resulting in injury.

■ Lens cleaning

• Clean the lens with a commercially available blower and/or

lens cleaner.

• The lens is easily scratched, so do not rub it with hard objects,

or strike it.

■ Main unit cleaning

• Clean the main unit after unplugging the power cord.

•Wipe dirt off the main unit gently with a soft cloth.

• If the soiling is severe, dip the cloth in a neutral

detergent diluted in water, wring well, and gently wipe

off the dirt, then finish up by wiping with a dry cloth.

● Replacing cooling fans

To maintain the performance, it is recommended that cooling fans should be replaced

about every 2 to 3 years. Consult with your dealer for details.

Lamp replacement (Continued)

Others

If This Happens Check

TDP-S21

The images from the

document camera

are blurry

TDP-S21

The images from the

document camera

are flickering

If you think something is wrong, check the followings before contacting customer service.

Please see “Trouble indications”

p.41

as well.

If This Happens Check

No power

Power goes out

during use

No picture

No audio

Picture not

displayed

correctly

Picture blurred

Part of picture

out of focus

Image is dark

Colors too light

Bad shading

Remote control

doesn’t work

Before calling service personnel

• Is the power cord plugged in? Is it connected to the projector?

• Is the lamp cover loose?

p.39

• Is the ambient temperature high?

p.41

• Is the air intake or air exhaust blocked?

p.41

• Is the projector turned on?

p.24

• Is the mute function on?

p.28

• Is the brightness setting minimized?

p.30

• Are the connections set up correctly?

p.21

• Are all the connected devices functioning properly?

• Is the projector turned on?

p.24

• Is the mute function on?

p.28

• Is the volume setting minimized?

p.25

• Are the connections set up correctly?

p.21

• Are all the connected devices functioning properly?

• Is the input signal supported by the projector?

p.45

p.46

• Is there something generating an abnormal video signal, for

instance the video tape?

• Is the lens dirty?

p.40

• Is the lens focus adjusted optimally?

p.25

• Is the projection distance within the projector’s supported range?

p.20

• Is the projector’s screen placement angle tilted too far?

p.20

• Are the sharpness or sampling phase adjustments off?

p.27

p.30

• Are the brightness or contrast adjustments off?

p.30

• Is the lamp nearing the end of its service life?

p.33

• Are the color, tint, R-level, G-level, or B-level adjustments off?

p.30

• Is the screen dirty?

• Is the lamp nearing the end of its service life?

p.33

• Are the remote control’s batteries drained?

• Are the batteries inserted into the remote control correctly?

p.19

• Is the remote control being used within the effective range?

p.19

• Are there any obstructions between the remote control and

projector?

• Are there any fluorescent or other bright lights shining at the

projector’s infrared remote sensor?

• Is the document imaging camera’s lens dirty?

• Is the document imaging camera out of focus?

p.36

• Is the location of the object being focused too dark?

• Is there impact from the room’s fluorescent lighting?

Turn off the fluorescent lights, or change the shutter speed settings.

p.30

Others

Specifications

■ List of general specifications

Item Specification

Consumption Power 230 W

Weight

TDP-S20: 3.0 kg

TDP-S21: 3.9 kg

External Dimensions TDP-S20: 285 × 98 × 254 mm (W × H × D)

(including protruding parts)

TDP-S21: 369 × 98 × 259 mm (W × H × D)

Cabinet material* PC+ABS resin and ABS resin

Conditions for usage

environment

Temp: 5°C to 35°C; relative humidity: 30% to 70%

Display pixels

1 chip DMD™

Picture elements

480,000 pixels (800H × 600V)

Lens Zoom lens F=2.0-2.2 f=18.20-21.84 mm

Lamp High-pressure mercury lamp

Projection screen size 30-300 inches

Projection distance 1.15-10.00m

Speaker 1 W (Monaural)

COMPUTER-1 terminal

Mini D sub 15 pin RGB / Y/PB/PR (dual use)

COMPUTER-2 terminal

Mini D sub 15 pin RGB / Y/PB/PR (dual use) / CAMERA (TDP-S21)

MONITOR terminal

Mini D sub 15 pin RGB / Y/PB/PR (dual use)

S-VIDEO terminal Mini DIN 4 pin

AUDIO (L/R) terminal RCA Pin Jack × 2, 1.5 V (rms), 22 kΩ or more

VIDEO terminal RCA Pin Jack, 1 V (p-p), 75 Ω

AUDIO IN terminal ø3.5mm dia. stereo mini-jack, 1.5V (rms); 22 kΩ or more

AUDIO OUT terminal ø3.5mm dia. stereo mini-jack

CONTROL terminal Mini DIN 8 pin (RS-232C)

■ Document camera specifications (TDP-S21)

Item Specification

Lens F=2.8, f=2.8mm

Focusing Switching in two steps

Zooming None (adjusted through distance from subject)

Image element 1/4.2 inches honeycomb CCD

Effective pixels for pickup section

629,856 pixels (648H × 486V × 2)

* Each plastic part displays the materials it is made from, in order to facilitate recycling after this

product becomes no longer usable.

Note

• Design, specifications, etc. subject to change without notice for improvements, etc.

Connection terminal

■ List of supported signals (RGB signals)

This projector supports the following RGB signals. Note, however, that depending on the

computer model, the screen may show flicker or streaking. Please adjust the projector if

this happens.

(Press the SET UP button, and adjust automatically or manually.

p.26

p.27

)

Resolution

720 x 400

640 x 480

800 x 600

832 x 624

1024 x 768

1152 x 864

1280 x 960

1280 x 1024

1400 x 1050

1600 x 1200

Mode

720x400_85

VGA_60

VGA_72

VGA_75

VGA_85

SVGA_56

SVGA_60

SVGA_72

SVGA_75

SVGA_85

MAC16"

XGA_60

XGA_70

XGA_75

XGA_85

MAC19"

SXGA1_75

QuadVGA_60

QuadVGA_85

SXGA3_60

SXGA3_75

SXGA3_85

SXGA+

UXGA_60

UXGA_65

UXGA_70

UXGA_75

UXGA_85

Refresh rate

(Hz)

85.039

59.940

72.809

75.000

85.008

56.250

60.317

72.188

75.000

85.061

74.550

60.004

70.069

75.029

84.997

74.700

75.000

60.000

85.002

60.020

75.025

85.024

60.012

60.000

65.000

70.000

75.000

85.000

H-frequency

(kHz)

37.927

31.469

37.861

37.500

43.269

35.156

37.879

48.077

46.875

53.674

49.725

48.363

56.476

60.023

68.667

60.134

67.500

60.000

85.938

63.981

79.976

91.146

63.973

75.000

81.250

87.500

93.750

106.250

Clock

(MHz)

35.500

25.175

31.500

36.000

40.000

50.000

49.500

56.250

57.283

65.000

75.000

78.750

94.500

79.857

108.000

148.500

108.000

135.000

157.500

118.094

162.000

175.500

189.000

202.500

229.500

Note

• Signals which resolution exceeds the native resolution (800 × 600 pixels) will be

compressed. For this reason, some information may be lost, or image quality may be

affected.

Others

■ List of supported signals (Y/PB/PR signals)

Signal format fh(kHz) fv(Hz)

480i(525i)@60Hz 15.73 59.94

480p(525p)@60Hz 31.47 59.94

576i(625i)@50Hz 15.63 50.00

576p(625p)@50Hz 31.25 50.00

720p(750p)@60Hz 45.00 60.00

720p(750p)@50Hz 37.50 50.00

1080i(1125i)@60Hz 33.75 60.00

1080i(1125i)@50Hz 28.13 50.00

1035i(1125i)@60Hz 33.75 60.00

1152i(1250i)@50Hz 31.25 50.00

■ List of supported signals (Video, S-Video signals)

Video mode fh(kHz) fv(Hz) fsc(MHz)

NTSC 15.73 60 3.58

PAL 15.63 50 4.43

SECAM 15.63 50 4.25 or 4.41

PAL-M 15.73 60 3.58

PAL-N 15.63 50 3.58

PAL-60 15.73 60 4.43

NTSC4.43 15.73 60 4.43

■ Pin assignment of COMPUTER-1/2 & MONITOR terminals

1115

Input Signal

• RGB input

RGB signals: 0.7V (p-p) 75 Ω

Horizontal sync signal

: TTL level (Pos/neg polarity)

Vertical sync signal: TTL level (Pos/neg polarity)

• Y/P

B/PR input

Y signal: 1.0V (p-p) 75 Ω

B/PR signals: 0.7V (p-p) 75 Ω

Pin Pin description

No. During RGB input During Y/PB/PR input

1 Video signal (R) Color difference signal (PR)

2 Video signal (G) Luminance signal (Y)

3 Video signal (B) Color difference signal (PB)

4 GND ∗

5 GND ∗

6GND (R) GND (P

)

7GND (G) GND (Y)

8GND (B) GND (P

)

9 N.C ∗

10 GND ∗

11 GND ∗

12 N.C ∗

13 Horizontal sync signal ∗

14 Vertical sync signal ∗

15 N.C ∗

Specifications (Continued)

∗ Do not connect anything.

■ CONTROL terminal

● Pin assignment

Signal Name

RXD

CTS

DSR

GND

RTS

N.C

TXD

GND

Pin No.

Description

Receiving data

Consent to send

Data set ready

Signal ground

Request to send

No connection

Sending data

Signal ground

Mini DIN 8 pin connector

● Interface format

1 Communication method RS-232C, 9600bps, No Parity, Data Length: 8 bits;

Stop Bit Length: 1 bit

2 Communication format STX (02h) Command (3Byte) ETX (03h)

Only 1 command valid per communication.

3 Data format For input commands, only ASCII-compliant all-uppercase

alphanumeric characters supported.

4 Replies Acknowledge ACK (06h) CR (0Dh) Data ... Normally ended

ACK (06h) ESC (1Bh) ... Aborted

No acknowledge NAK (15h)

If commands are to be sent consecutively, wait for the response from the projector

before sending the next command.

● Main Commands

Item Command

Computer (1) input select IN1

Computer (2) input select IN2

Video input select IN3

S-video input select IN4

Camera input select (TDP-S21)

IN5

Item Command

Power on PON

Power off POF

Icon display on MO0

Icon display off MO1

Auto setting (RGB input) PAT

Status display on DON

Status display off DOF

Note

• Contact your dealer for control cable and other commands.

■ Separately Sold Product

Replacement Lamp Model TLPLV4

Mini D sub 15 Pin connector

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TDP-S21 in the language / languages: English as an attachment in your email.

The manual is 6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Toshiba TDP-S21 Manual

Product: