485549
43
Zoom out
Zoom in
Previous page
1/52
Next page
43
Maintenance
Lamp replacement (Continued)
Unplug power cord.
Wait until lamp is sufficiently cooled.
Wait for at least 1 hour.
Remove the lamp cover.
Loosen the screw, raise the lamp cover with your
fingers as shown to remove the lamp cover. Use
care to avoid any damage to nails and/or tip of your
finger(s). If you have any difficulty in removal, you
can use a screwdriver or any other smaller tool for
your convenience.
Pull out the lamp.
Loosen the two lamp locking screws, pull up the
handle, and remove the lamp.
Mount the new lamp.
Align the orientation, press down the new lamp
until the bottom is reached, and lock in place using
the two lamp locking screws.
Replace the lamp cover.
Align the cover, and press it in, then tighten the screw loosened in step until the lamp
cover is no longer loose. (Be sure to replace the lamp cover.)
Reset the lamp timer.
See the lamp's manual for instructions on resetting the lamp timer.
Lamp cover
1
2
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TDP-P9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TDP-P9 in the language / languages: English as an attachment in your email.

The manual is 2,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info