485547
39
Zoom out
Zoom in
Previous page
1/45
Next page
Additional Information 39
English
Step 1. Turn the power off and disconnect the projector from the wall socket.
Step 2. Protect the projector's surface by clearing a flat open area on your desk and
placing a soft item on the desk for padding.
Step 3. Turn the projector over. Then loosen the screws and remove the lamp cover. If
the lamp is hot, avoid burns by waiting for 45 minutes until the lamp has cooled.
Step 4. Loosen the screw fixing the lamp to the projector. If
the screw is not loosened completely, the lamp
cannot be removed. Be careful not to lose the screw
as it is needed to hold the replacement lamp in place.
It is strongly recommended that you use a magnetic-
head screwdriver.
Step 5. Lift the handle so that it stands up. Use the handle
to slowly pull the lamp out of the projector.
Pulling it too quickly may cause the lamp to break and
scatter broken glass in the projector.
Do not place the lamp in locations where water might
splash on it, children can reach it, or near flammable
materials.
Do not insert your hands into the projector after the lamp
is removed. If you touch the optical components inside,
it could cause color unevenness and distortion of the
projected images.
Step 6. Insert a new lamp. Ensure the handle is fully laid flat and locked in place.
Reinsert and tighten the screw firmly.
Loose screw may cause a bad connection, which could result in malfunction.
Do not over tighten the screw.
Step 7. Reinstall the lamp cover and tighten the screws.
Step 8. Restart the projector.
Do not turn the power on with the lamp cover
removed.
Step 9. Resetting the lamp counter
See the lamp’s manual for instructions on
resetting the lamp timer.
Do not reset if the lamp is not replaced as this
could cause damage.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TDP-P75 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TDP-P75 in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info