485547
26
Zoom out
Zoom in
Previous page
1/45
Next page
Operation26
English
Operation
Start up
1. Switch all of the connected equipment on.
2. Plug the power cord into the projector and into a
wall socket. Turn on the wall socket switch (where
fitted). Check that the ON indicator on the
projector lights orange after power has been
applied.
3. Remove the lens cap. If it is left on, it could become
deformed due to heat.
4. Press and hold the ON/STANDBY button on the
remote control or projector to start the unit. The
ON indicator flashes green and stays green
when the unit is on.
5. The start up procedure takes about 20 seconds
after pressing the ON/STANDBY button. In the
later stage of start up, a default Toshiba logo is
projected.
6. The projector will start to search for input
signals. The projector screen displays the
current input source being scanned at the upper left corner of the screen. If
no input source signal is detected, the search will continue until an input
source signal is detected.
7. You can also press the INPUT button on the projector or remote control to
select an input signal to display. For more information, refer to .
If the frequency/ resolution of the input signal exceeds the projectors operating
range, you will see the message “Unsupported Signal” displayed on a blank screen.
p.28
CAUTION
• Do not look into the lens while the lamp is on. The strong light from the lamp
may cause damage to your eyes or sight.
• Do not block the air intake or exhaust. Doing so could cause a fire due to
internal overheating.
• Do not place your hands, face, or other objects near the air exhaust. Doing
so could cause burns, deform/break the object.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TDP-P75 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TDP-P75 in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info