485546
30
Zoom out
Zoom in
Previous page
1/42
Next page
30
INSTALLATION MENU
ITEM SETTING FUNCTION
LANGUAGE --------- -5言語 ------------ Selects a language used for displays on the screen, such as
menus. Adjusts computer video images.
RGB & COMPONENT ---------------- Adjusts computer video images.
AUTO * --------------------------------------- Selecting Auto and pressing ENTER button automatically
adjust position and size of the projected images in
accordance with the image signals from the computer.
FREQUENCY *−15∼+15-------- If any wide streak pattern appears on the projected images, it
can be adjusted with this setting while viewing the images.
PHASE *------------ 0 ∼ 31 ----------- If any flicker or blur appears on the projected images, it can be
adjusted with this setting while viewing the images.
H.POS * --------- −30 ∼ +30 ------- Moves display position of projected images in horizontal
direction.
V. POS * --------- −30 +30-------- Moves display position of projected images in vertical direction.
MIRROR ------ FLOOR FRONT ----- Select this setting with the projector set on the floor when
viewing the projected images from the front side.Normally,
select this setting.
---------- CEILING FRONT ---- Select this setting with the projector suspended from the
ceiling when viewing the projected images from the front side.
------------ FLOOR REAR ------ Select this setting with the projector set on the floor when
viewing the projected images from the rear side of the screen.
----------- CEILING REAR ----- Select this setting with the projector suspended from the
ceiling when viewing the projected images from the rear side
of the screen.
KEYSTONE --- −12∼+12 -------- Select this setting when correcting trapezoidal distortion.
Normally, select 0.
PATTERN ----------------------------------- Pressing ENTER button reveals the test pattern for focus
adjustment.
The items with * mark function only for 1080i, 720p, 525p, and 625p input signals and input signals from DVI terminal.
The varying range of the vertical position depends on the type of the input signal. With some values the vertical position may not
change, but this is not a failure.
With the inputs from DVI-DIGITAL terminal, no change appear on the projected images with adjustment of the dividing ratio and
fine, but this is not a failure.
Without input signals, only some of the above items can be changed.
INSTALLATION...
RGB & COMPONENT
MIRROR
KEYSTONE
PATTERN
LANGUAGE
RGB & COMPONENT
INSTALLATION...
FREQUENTCY
AUTO YES?
PHASE
H. POS
V. POS
0
15
0
0
DIASPLAY MENU
On the memory for projected image quality
This projector allows each item in the picture quality setting menu and the professional-use picture quality
setting menu (except for color temperature use-adjustment) to be adjusted to up to three kinds of favorable
picture quality for each input signal.
Input that allows the setting Number of settings
VIDEO 3
S-VIDEO 3
COMPONENT 1, 2 3
DVI-ANALOG/DIGITAL 3
To store the settings:
(Refer to Page 25 for how to set menus.)
1. Set an item in the picture quality setting menu and the professional-use picture quality setting menu.
2. Reveal the signal setting menu.
3. Select Store the setting by pressing {, } buttons.
4. Press ENTER button.
The setting storage menu appears.
5. Select the memory where the setting is to be stored by pressing {, } buttons.
6. Press ENTER button.
The setting is stored in the memory.
To cancel the menus:
7. Press MENU button.
To apply the set picture quality:
1. Press MEMORY1, 2, or 3 button.
The picture quality of the projected image comes to the set quality.
INSTALLATION...
MEMORY 2
MEMORY 3
MEMORY 1
SAVE
SETTING WITH MENUS
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TDP-MT500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TDP-MT500 in the language / languages: English as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info