485546
22
Zoom out
Zoom in
Previous page
1/42
Next page
22
When stopping projection:
8 Press POWER ( ) button.
A confirmation message appears on the screen.
To cancel this state, wait for a while, or press EXIT but-
ton or MENU button of the remote controller, or press
MENU/EXIT button of the projector.
9 Press POWER ( ) button again.
The light-source lamp comes off and the projector comes
to standby state. At this time POWER indicator blinks in
orange.
10
Wait about 2 minutes until POWER
indicator comes on in orange.
Wait about 2 minutes in standby state, because during
this time the intake/exhaust fan is turning to cool down
the light-source lamp.
The intake/exhaust fan continues to turn for about one
minute after POWER indicator has come on in orange.
Do not turn off the main power switch while POWER in-
dicator is blinking. If the main power switch is turned off
immediately after use, the projector may fall in failure.
The fan generates a loud sound while cooling down, but
it is not a failure.
11
Turn OFF the main power switch
(Turn to indication O).
When the projector is not used for a long time, unplug
the power plug from the power outlet for safety.
Set the lens cap to prevent dust from being gathered
from outside.
VIEWING VIDEO IMAGES
ENTER
WIDETELE
LAMP
TEMP
MENU/EXIT
POWER
Main power switch
POWER button
POWER button/
POWER indicator
POWER ON/OFF
C1
C2
DVI
D
DVI
A
S
V
COMP1 COMP2
DVI-D
DVI-AVIDEOS-VIDEO
16:9
16:9
4:3
4:3
ZOOM
ZM
REAL
REAL
DYN
DYNAMIC
1
2
3
ENTER
EXIT
MENU
CONTRAST
BRIGHT COLOR TINT
COLOR
TEMP
GAMMA
SHARPNESS
LIGHT
LIGHT
SHGAM
TEM
TIN
COL
BRICNT
SOURCE
ASPECT
If the projected image frame is deformed to a trapezoid:
Adjust the trapezoidal correction value contained in the setting menu.
(Refer to Page 25 for the method of setting the menu.)
1. Reveal the setting menu.
2. Select Trapezoidal correction by pressing {, } buttons.
3. Press ENTER button.
4. While viewing the image frame, align the upper and lower sides of the
image frame by pressing $, % buttons.
When canceling the menu:
5. Press MENU button.
KEYSTONE
INSTALLATION...
KEYSTONE
0
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TDP-MT500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TDP-MT500 in the language / languages: English as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info