214662

Toshiba tdp ew25 Manual

33
Zoom out
Zoom in
Previous page
1/50
Next page
64 65
Operations
Using the Network Utility
Displaying a computer’s screen via the projector
1
Launch the Network Utility
software application.
When the Network Utility launches, the Screen
Image transmission mode window appears on
the computer screen.
To switch to the Screen Image transmission
mode window from another mode, click on the
Screen Image icon
.
2
Select Transmission mode.
Click on Update automatically or Update manually. See step
6
for the meanings of
Update automatically and Update manually.
3
Click on the Advanced button.
The Screen Image: Advanced Settings dialog
appears. Set the dialog as shown below, as
necessary.
Interruption
Check the No Interruptions checkbox to
prevent other computers from interrupting the
projector, for example, during presentation.
Window Display
Select the Place in Tasktray at the start
of transmission checkbox to iconify the
Network Utility and place it in the computer’s
tasktray when transmission initiated.
To display the window, double click on this
icon, or right click and select Open from the
popup menu. Even with the Network Utility
window minimized, you can use the pop-
up menu to stop or resume transmission as
described in step
4
and later.
Transmission Mode (Image)
Selecting High quality improves the
quality of the projected image, but lowers
communication speed. Selecting High speed
has the opposite effect.
Transmission Mode (Sound)
Check the Transmit sound to a projector
(Only when connected with only one projector) checkbox to transmit the sound
being played on a computer to the projector.
Note: The sound can be sent when one projector is selected.
N
•
•
•
•
4
Select the screen image you wish
the projector to display.
Select Desktop
The computer screen image is transmitted as-is.
Select application window
Select a running application (e.g. Microsoft
®
PowerPoint
®
), and send that application’s
window only.
The desktop and a list of running applications are displayed.
Select the desired application from this list. (If the desired
application is not on the list, launch it. Note that if too many
applications are running, it will consume the computer’s
resources, which could slow communication speed.)
5
Select the projector to be
transmitted.
The IDs of projectors accessible for transmission
will be listed. (When a projector name is set,
that name appears instead of MAC address.)
Select the checkbox of the projector you wish
to transmit to from this list. Then icon
is
displayed on the projector’s screen for a few
seconds.
It is possible to select up-to four projectors.
6
Click on the button.
When “Update automatically” is selected in step
2
Screen images are sent consecutively after the button is clicked. Besides,
the sound being played on a computer can be sent to the projector.
When “Update manually” is selected in step
2
A single screen image is sent when the button is clicked.
7
To halt transmission from Update automatically, click on the
button.
If the Network Utility icon has been placed in the tasktray, double click on the icon
to display the window, then halt transmission, or right click on the icon, and halt
transmission.
Notes
It may not be possible to transmit the images from movie player or other video applications.
When using “Update automatically”, the transmitted image refresh rate depends on the
performance of the computer you are using and the surrounding radio wave environment.
The projector screen may have a few differences from the computer screen.
If you selected application window in step
4
, if that application is not active (in use), the
image may not be correctly displayed by the projector.
The projector ID is the MAC address of the wired LAN inserted into the projector.
Playing contents protected by copyright is not supported.
•
•
•
•
•
•
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba tdp ew25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba tdp ew25 in the language / languages: English as an attachment in your email.

The manual is 4,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info