562486
50
Zoom out
Zoom in
Previous page
1/76
Next page
50
How to Use
Mode Description
COLOR
[COLOR]:You can adjust all the colors at the same time. Press the PLUS (+) button to
deepen the colors. Press the MINUS (-) button to lighten the colors.[RED], [MAGENTA],
[BLUE], [CYAN], [GREEN], or [YELLOW]:You can adjust each color individually. Press
the PLUS (+) button to deepen the selected color. Press the MINUS (-) button to lighten the
selected color.
This adjustment doesn’t work in the sRGB picture mode.
COLOR
TEMPERATURE
You can adjust the color temperature.The image becomes reddish as the color temperature
decreases, and it becomes bluish as the color temperature increases.
This adjustment doesn’t work in the sRGB picture mode.
COLOR CONTROL
The color levels of red, green, and blue are adjusted by the color bars.
R: Red, G: Green, B: Blue
This adjustment doesn’t work in the sRGB picture mode.
GAMMA SELECTION
You can select the gamma mode from NATIVE, S GAMMA, 2.2, 2.4, OPTION, and
PROGRAMMABLE.PROGRAMMABLE can change the GAMMA characteristic curve
via a computer.Contact your dealer for further details.
GAMMA is f xed to 2.2 in the sRGB picture mode. When PROGRAMMABLE has been
selected, the setting for color temperature i s f xed at 10,000 K (NATIVE).
AUTO BRIGHTNESS
This function controls the screen brightness depending on the ambient light for easy
viewing.In addition, it changes the screen brightness depending on the ambient light and
what are displayed on the screen to reduce power consumption as low as possible.
This adjustment doesn’t work in the sRGB or CINEMA picture mode.
[AUTO BRIGHTNESS]
AUTO:
The settings of AUTO BRIGHTNESS are adjusted automatically.
When you sele ct AUTO, you cannot adjust any other items than
[CONTROL] individually.
LOCAL:
The AUTO BRIGHTNESS function is enabled and you can adjust
[CONTROL] and subsequent items individually.
REMOTE:
The AUTO BRIGHTNESS function is enabled. In addition, the monitor
enters the intercommunication mode where multiple monitors are
controlled collectively. (See page 65.)
OFF: This function is disabled.
[CONTROL]
PRIMARY:
Select this setting to conf gure the monitor as Master when controlling
multiple monitors collectively.
SECONDARY:
Select this setting to use the monitor alone or to conf gure the monitor as
Slave when controlling multiple monitors collectively.
[LIGHT FROM BACK]
This function is enabled only when [REAR SENSOR] is ON.When a light source such as a
light and a window is behind the monitor, the rear sensor takes precedence.
YES:
Select this setting when there is a light source such lighting equipment and
a window behind the monitor.
NO:
Select this setting when there is no light source such lighting equipment
and a window behind the monitor.
[BACK WALL]
This function is enabled only when [REAR SENSOR] is ON.Select the following settings
according to the distance between the rear of the monitor and the wall or window.
FAR: The distance is 5 meters or longer.
NEAR: The distance is 5 meters or shorter.
[FRONT SENSOR]
Select ON for normal use.
OFF: Select this setting when the sensor on the front panel is shielded.
Picture
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TD-Z471 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TD-Z471 in the language / languages: English as an attachment in your email.

The manual is 19,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info