562486
44
Zoom out
Zoom in
Previous page
1/76
Next page
44
How to Use
4) Operation commands
The operation commands congure the basic operation settings of this LCD display. The commands may not work
during signal switchover.
The operation commands have no data codes.
Operation ASCII HEX
POWER ON ! 21h
POWER OFF " 22h
FORCE POWER OFF WITH OPS* " " 22h 22h
INPUT HDMI1 _r1 5Fh 72h 31h
INPUT HDMI2 _r7 5Fh 72h 37h
INPUT DVI-D _r2 5Fh 72h 32h
INPUT D-SUB _r3 5Fh 72h 33h
INPUT OPTION** _r5 5Fh 72h 35h
INPUT DISPLAYPORT _r6 5Fh 72h 36h
INPUT VIDEO _v1 5Fh 76h 31h
INPUT YPbPr _v2 5Fh 76h 32h
INPUT S-VIDEO _v3 5Fh 76h 33h
BACKLIGHT LUMINANCE CONTROL _b050 5Fh 62h 30h 35h 30h
IR CONTROL ON _i1 5Fh 69h 31h
IR CONTROL OFF _i0 5Fh 69h 30h
LOCAL-KEY CONTROL ON _k1 5Fh 6Bh 31h
LOCAL-KEY CONTROL OFF _k0 5Fh 6Bh 30h
* Used when the OPS-compliant computer makes no response.
** OPTION can be used when an expansion module is mounted on the option slot.
y After sending the POWER ON or POWER OFF command, wait for at least 12 seconds to send the next command.
y After sending a command for video input selection, wait for at least 5 seconds to send the next command. Otherwise, the
monitor may not reply within 600 ms.
y Set the timeout value of the control device on the host side to 30 seconds or longer.
y In the power-off mode, only the POWER ON operation command and the power status acquisition commands described
in the next paragraph work.
y In the sleep mode, only the POWER ON and POWER OFF operation commands and the power status acquisition
commands described in the next paragraph work.
When no expansion module is mounted, the FORCE POWER OFF WITH OPS operation command is unavailable.
When an expansion module is mounted, all the input connectors dont enter the sleep mode.
y After turning off the power using an operation command, wait for at least 2 seconds to turn off the AC power using the
main power switch or the breaker. Otherwise, the OSD settings may be reset to the factory defaults.
5) Read command
The computer sends the command without datacode to the monitor.
After receiving this command, the monitor returns the command with datacode including the current status to the
computer.
Example: When the computer asks the power status of the monitor, and the status of the monitor is powered-on.
Control command from computer
Return command from
monitor to computer
Description of command
31 30 34 38 76 50 0D ‘0’‘0’‘v’‘P’[enter] Sending a command for checking the
power status
31 30 34 38 76 50 31 0D
‘1’ ‘0’ ‘4’ ‘8’‘v’‘P’‘1’[enter]
Monitor is powered-on.
Remote control
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TD-Z471 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TD-Z471 in the language / languages: English as an attachment in your email.

The manual is 19,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info