562486
35
Zoom out
Zoom in
Previous page
1/76
Next page
35
How to Use
Power button
or
Wireless remote
control
Power button
Within 2 seconds after turning off the power by the POWER button on the wireless remote control or the monitor or by a
communication command, don’t turn off the main power switch, don’t disconnect the power cord, and don’t turn off the
breaker.
If the AC power is turned off immediately after the power-off operation, all the OSD settings including the language
selection may be reset to the factory defaults at the next power-on.
If the OSD settings are reset to the factory defaults as described above, reconfigure the OSD settings using the
following procedure.
1. Turn off the power of the monitor using the wireless remote control or otherwise.
2. Wait for at least 2 seconds.
3. Turn on the power of the monitor using the wireless remote control or otherwise.
4. Check and reconfigure the OSD settings.
Power Management Function
This function reduces the power consumption of the monitor when the keyboard or the mouse is not used for a xed period
even though the power of the monitor is on.
While this function is working, the screen becomes dark and the power indicator glows green and red.
This function is available only when a computer equipped with the VESA-approved DPM Power Management function is
connected to the monitor.
When the power saver in the OSD menu is turned ON, the power management function works.
RGB: When the sync signal of computer input (HDMI1, HDMI2, DVI-D, D-SUB, DISPLAYPORT) is
terminated, the monitor will be in the sleep mode in several seconds.
VIDEO: When the sync signal of video input (YPbPr, S-VIDEO, or VIDEO) is terminated, the monitor will be
in the sleep mode in approximately 10 minutes.
[Description]
DPM: Acronym for Display Power Management
•The default power management settings (power savers) for RGB and VIDEO are ON.
•When an expansion module is in the option slot, the monitor doesn’t enter the sleep mode even when POWER SAVE in the
CONFIGURATION1 menu is set to ON. Even when other video input is selected, the monitor doesn’t enter the sleep mode.
Power Indicator
Status LED
Power-on mode Green
Power-off mode Red
Power Standby when
“SCHEDULE” is enable
Red On
Green Blinking
Sleep mode Red, Green
The main power is off. Off
Diagnosis (Detecting failure) Red Blinking * See troubleshooting on page 68.
Power Management Function
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TD-Z471 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TD-Z471 in the language / languages: English as an attachment in your email.

The manual is 19,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info