562486
25
Zoom out
Zoom in
Previous page
1/76
Next page
25
Preparation for use
Connection procedure
Connecting with a computer (digital connection)
Digital connection:
Connection via the HDMI IN connector
(1) Connect an HDMI cable (commercially available) to the HDMI1 IN or HDMI2 IN connector.
(2) Select [HDMI1] or [HDMI2] according to the connected connector by pressing the INPUT button on the monitor or
the HDMI1 or HDMI2 button on the wireless remote control.
Connection via the DVI-D IN connector
(1) Connect a DVI-D cable (commercially available) to the DVI-D IN connector.
(2) Select [DVI-D] using the INPUT button on the monitor or the DVI-D button on the wireless remote control.
Connection via the DISPLAYPORT IN connector
(1) Connect a DisplayPort cable (commercially available) to the DISPLAYPORT IN connector.
(2) Select [DISPLAYPORT] using the INPUT button on the monitor or the DISPLAYPORT button on the wireless
remote control.
Second monitor connection:
Connect the DVI-D OUT connector on the rst monitor and the DVI-D IN connector on the second monitor using a DVI-D cable
(commercially available).
In the daisy chain connection, you can connect up to 4 monitors (when using 2-meter cables). However, the maximum
number of connectable monitors may be limited. It is recommended to check the number of connectable monitors in
advance in your installation environment.
Set RGB of POWER SAVE in the CONFIGURATION1 menu to OFF when using DVI-D in the daisy chain mode.
Audio connection:
Connect an audio cable 3.5-mm stereo mini) (commercially available) to the AUDIO ANALOG IN connector. When
connecting an HDMI cable, select [HDMI1] or [HDMI2] according to the connected connector by pressing the INPUT button on
the monitor or the HDMI1 or HDMI2 button on the wireless remote control. Note that you can select HDMI1, HDMI2, or
ANALOG audio at this time. (You can select HDMI audio only when the video input is [HDMI1] or [HDMI2]. The audio of only
the selected input is output and HDMI is displayed.) When connecting a DVI-D cable, select [DVI-D] using the INPUT button on
the monitor or the DVI-D button on the wireless remote control. At the moment of the selection, the audio is automatically
switched to [ANALOG]. When connecting a DisplayPort cable, select [DISPLAYPORT] using the INPUT button on
the monitor or the DISPLAYPORT button on the wireless remote control. Note that you can select DISPLAYPORT or
ANALOG audio at this time.
To output the audio to the second monitor, connect the AUDIO ANALOG OUT connector on the rst monitor and the
AUDIO ANALOG IN connector on the second monitor using an audio cable (ø3.5-mm stereo mini) (commercially
available). Even when HDMI or DISPLAYPORT is selected on the rst monitor, the selected audio is output from the
AUDIO ANALOG OUT connector.
For switching the audio input when an HDMI cable or a DisplayPort cable is connected, see “Audio input change.”
DVI-D IN
HDMI1 IN or HDMI2 IN
DP IN
AUDIO ANALOG IN
HDMI cable
DisplayPort cable
DVI-D cable
DVI-D cable
To DVI-D output
To HDMI output
To DP output
To audio output
Audio cable
(ø3.5-mm stereo mini)
DVI-D IN
DVI-D OUT
Audio cable
(ø3.5-mm stereo mini)
AUDIO ANALOG OUT
AUDIO ANALOG IN
Personal computer
(DVI-D, HDMI)
LCD display (second display)
LCD display ( rst display)
LCD display
(fi rst display)
LCD display
(second display)
Connecting with a computer (digital connection)
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TD-Z471 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TD-Z471 in the language / languages: English as an attachment in your email.

The manual is 19,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info