562486
11
Zoom out
Zoom in
Previous page
1/76
Next page
11
Introduction
Parts Name and Functions
Buttons, Switch, and Indicator
ON
OFF
Front
Control buttons
Rearedis thgiRedis tfeL
1 Main Power Switch —Switches the main power on/off and is used as the disconnect device.
Within 2 seconds after turning off the power by the POWER button on the wireless remote control or the monitor or by
a communication command, don’t turn off the main power switch, don’t disconnect the power cord, and don’t turn off
the breaker. If the AC power is turned off immediately after the power-off operation, all the OSD settings including the
language selection may be reset to the factory defaults at the next power-on. If the OSD settings are reset to the factory
defaults as described above, reconfigure the OSD settings using the following procedure.
Turn off the power of the monitor using the wireless remote control or otherwise.
Wait for at least 2 seconds.
Turn on the power of the monitor using the wireless remote control or otherwise.
Check and recongure the OSD settings.
2 Remote control sensor and Power indicator
Remote control sensor: Receives the signal from the wireless remote control.
Power indicator: Indicates the state of the LCD display.
Steady green: The power is on.
Steady red: The power is off. Some operations such as power-on are possible.
Steady green and red: The LCD display is in the sleep mode.
Off: The main power is off.
Steady red and blinking green: The LCD display is in the schedule standby mode.
Blinking red: The LCD display has an error (detected by the self-diagnostic function).
3 POWER button—Switches the power on/off.
This button doesn’t work when the power indicator is off. Turn on the main power. (See page 35.)
4 MUTE button—Switches the audio mute on/off.
5 INPUT button—Displays the OSD menu to switch the video input. You can select [HDMI1], [HDMI2], [DVI-D],
[D-SUB], [OPTION]*, [DISPLAYPORT], [YPbPr], [S-VIDEO], or [VIDEO] using the UP (▲) or DOWN (▼)
button.
OPTION can be used when an expansion module is mounted on the option slot.
6 PLUS (+) button—Acts as (+) button to increase the adjustment in the OSD menu. Increases the audio output level
when the OSD menu is off.
7 MINUS (-) button—Acts as (-) button to decrease the adjustment in the OSD menu. Decreases the audio output level
when the OSD menu is off.
8 UP () button—Acts as (▲)button to move the highlighted area up to select an adjustment item in the OSD menu.
9 DOWN () button—Acts as (▼)button to move the highlighted area down to select an adjustment item in the OSD
menu.
10 EXIT button—Activates the OSD menu when the OSD menu is off. Acts as EXIT button to go back to the previous
OSD menu.
11 Speakers—Audio sound is output from the built-in speakers.
12 Brightness sensor (on the front and rear)—Sensor for the auto brightness function.
(Reference) Control Lock mode
You can lock the operation buttons. See page 64.
For details about the OSD menu operation using the buttons, see “Basic operation of OSD.” (See page 48.)
Parts Name and Functions
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TD-Z471 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TD-Z471 in the language / languages: English as an attachment in your email.

The manual is 19,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info