10
EN
Immediately,
• thePower/Dataindicatorlightwillilluminate
• thedrivewillpowerup
• thedriveshouldmountandanewdriveicon
should appear in “My Computer”
In case the drive does not mount after a few
seconds,
it may not have sufficient power. Although the
Power/Data light is illuminated, you need use the
secondary type A connector.
Please follow the below instructions:
1. Unplug the mini-USB connector from the drive.
2. Plug in the secondary type A connector into a free
USB port of the host system or active USB hub.
3. Plug the mini-USB connector back into the drive
again. The drive should be mounted correctly
after a few seconds.