574998

Toshiba SL-5300 Series Manual

220
Zoom out
Zoom in
Previous page
1/224
Next page
24. ERROR MESSAGE TABLE EO1-31009
24. ERROR MESSAGE TABLE
24- 2
(Continued)
Error Message Cause Solution
Paper Feed Error
occurs.
Please adjust print
position.
The label format doesn’t match the label
cassette or the print start position is
incorrect.
• Re-load the label.
• Re-program the label format.
Abnormal Head
Temp. is detected.
Thermal head temperature is over the
limit.
Leave the scale on for 3 minutes or
more, and then perform operations.
Abnormal Head
source is detected.
The power source for thermal head is
incorrect because of the circuit failure.
Turn off the power, and then ask your
authorized TOSHIBA TEC
representative.
Unit Price is over the
limit.
The Number of digits of the Unit Price is
over the maximum limit.
Re-program the Unit Price so that the
Number of digits is within the maximum
limit.
The number of letters
is over the limit.
The Number of characters is over the
maximum limit.
Re-program the name so that the
Number of characters is within the
maximum limit.
Format Read Error
occurs.
The selected label format cannot be read
because of incorrect memory.
Reset the label format in the label format
setting mode.
Format No. Error
occurs.
Press C key and set
correct Format,
please.
Because unavailable Format No. is
selected, the label format cannot read.
Re-program a correct label format
Number.
Appointed code is not
found.
The selected code doesn’t exist in the file. Enter a correct code which exists in the
file.
Flash Rom Write Error
occurs.
Because of Flash-ROM failure, the
selected data cannot be written into the
Flash-ROM.
Turn off the power, and then ask your
authorized TOSHIBA TEC
representative.
Flash Rom Format
Error occurs.
Because of Flash-ROM failure, data in the
Flash-ROM cannot be erased.
Turn off the power, and then ask your
authorized TOSHIBA TEC
representative.
No data is found. The selected item and data are not found
in the memory.
Enter a correct Code Number.
The File is full. There is no space for saving the selected
data.
Delete unnecessary PLU data from the
file.
There is no File of
PLU Field information.
Because the PLU file is damaged, the
selected PLU cannot be called.
Delete this PLU file, and then re-program
the PLU field.
This position is over
the frame.
The selected position is out of the label
format area.
Re-program the label format so that the
print position is within the format.
MC Access Error
occurs.
File and folder information cannot be
taken from the memory card.
Turn off the power, and then ask your
authorized TOSHIBA TEC
representative.
This Format is not
selectable.
The selected label format Number doesn’t
exist.
Specify the label format Number which is
available for this scale.
Folder cannot be
made.
The Number of digits of folder name is
over 8 digits.
Set the folder name with up to 8 digits of
alphabets and numeric.
… 220 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba SL-5300 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba SL-5300 Series in the language / languages: English as an attachment in your email.

The manual is 5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info