574998

Toshiba SL-5300 Series Manual

14
Zoom out
Zoom in
Previous page
1/224
Next page
4. PROCEDURE BEFORE DAILY OPERATION EO1-31009
4.1 Installation of the Scale
4- 1
4. PROCEDURE BEFORE DAILY OPERATION
4.1 Installation of the Scale
Install the scale on the well-ventilated, plane and level surface. Be sure to provide enough space
around the scale as follows for easy operation.
As viewed from the top As viewed from the right side
NOTES:
1. Remove anything that touches or may touch the platter around the scale. Failure to do this may cause
incorrect weighing operation.
2. Avoid the location where the scale is subject to the direct wind from the air conditioner. Failure to do this
may cause incorrect weighing operation.
3. TOSHIBA TEC will not guarantee any problems with the scale and the peripheral devices caused by
installation or removal of the peripherals by yourself.
4.2 Preparation
Before starting the business hours, perform the following preparatory operations.
1. Plug in the scale. (Refer to Section 5.)
2. Adjust the level of the scale. (Refer to Section 6.)
3. Turn ON the power switch. (Refer to Section 7.)
4. Adjust the angle of the operation panel. (Refer to Section 9.)
5. Load the media. (Refer to Section 8.)
After the business hour is over, clean the scale.
1. Turn OFF the power switch. (Refer to Section 7.)
2. Clean the scale. (Refer to Section 11.)
WARNING!
When installing the scale, avoid locations that have the following adverse conditions. Failure to do this
may cause a fire, electric shock, or injury.
Direct sunlight, high temperature, high humidity, rapid temperature change, vibrations, dust, near a
device generating magnetism or electromagnetic wave, near fire or moisture, unstable table.
50 mm 50 mm
150 mm
Platter
Power Cord
CAUTION!
Basically, the power cord should come out from the left side of the scale being fitted into the ditch of th
e
scale bottom. If it cannot, care must be taken when adjusting the adjustable legs so as not to squash
the power cord.
Ditch
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba SL-5300 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba SL-5300 Series in the language / languages: English as an attachment in your email.

The manual is 5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info