17044
66
Zoom out
Zoom in
Previous page
1/72
Next page
66
Others
Before Calling Service Personnel
Check the following guide for the possible cause of a problem before contacting service.
Symptom
No power.
The LCD turned off by itself.
No picture. (Other than built-
in LCD monitor)
No sound.
(Connected TV or audio
system.)
The playback picture has
occasional distortion.
Brightness is unstable or
noises are present in the
playback pictures. (Other
than built-in LCD monitor)
The player does not start
playback.
Playback does not follow the
course of the discs program.
Buttons do not work.
Cause
The AC adapter or power plug is
disconnected.
The battery pack has been removed.
Battery empty.
The automatic LCD off function turned the
LCD off.
The player is not set to the external output
mode (AV-OUT).
The connected TV is not set to receive
DVD signal output.
The equipment connected via the audio/
video cable is not set to receive DVD
signal output.
The volume is too low.
The audio receiver or TV is turned off.
The setting of output sound format is
incorrect.
The disc is dirty.
Player is in fast forward or fast reverse
mode.
The player was moved or given a shock.
The disc is not set firmly.
The effect of copy protection.
No disc is inserted.
An unplayable disc is inserted.
The disc is inserted upside down.
The disc is not inserted securely.
The disc is dirty.
The parental lock function is set.
The player is set to the external input
mode (AV-IN).
It is in the repeat playback mode, memory
playback, etc.
Power supply fluctuations or other
abnormalities such as static electricity may
interrupt correct operation.
Correction
Connect the AC adapter or power plug
securely.
Install the battery pack.
Re-charge the battery.
Press any button.
Press MODE and switch to the external
output mode (AV-OUT).
Select the appropriate video input mode
on the TV so the picture from the player
appears on the TV screen.
Select the correct input mode of the
audio receiver so you can listen to the
sound from the player.
Adjust the volume by turning the volume
control.
Turn on the equipment connected with
the audio/video cable.
Select the proper audio setting.
Eject the disc and clean it.
Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
Vibrating or shaking the player during
playback may produce distortion. This is
not a malfunction. If not restored to usual
status, stop playback and start again.
Remove the disc and set it again.
Connect the player directly to the TV.
Avoid connecting the player to a VCR or
TV/VCR combination.
Insert a disc.
Insert a playable disc. (Check the disc
type, color system and region number.)
Insert the disc with the playback side
down.
Insert the disc securely in the disc holder.
Clean the disc.
Cancel the parental lock function or
change the parental lock level.
To play a disc with the player, LCD
Screen Only or AV-OUT needs to be set.
Press MODE and switch to LCD Screen
Only.
These operations may prevent a proper
progression of the contents.
Turn the power on or off with the POWER
switch. Or disconnect the power plug and
insert it into the wall outlet again.
Page
16
60
60
21
54, 55
54
54 , 55
19
54 59
39, 46
49
8
18
54
18
9
18
18
8
50
54
Symptoms and correction
SD-P1600_E_P65-72 05.1.14, 10:42 AM66
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba SDP1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba SDP1600 in the language / languages: English as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info