35452
37
Zoom out
Zoom in
Previous page
1/39
Next page
37
Recording (VCR)
Timer recording
Timer recording can be programmed on-screen with the remote control.
The built-in timer allows automatic unattended recording of up to 8
programs within 1 month.
Timer recording
Notes:
Press CANCEL to move cursor backward for correction.
To record from external source set the channel to L1 or
L2.
Notes:
If the timer symbol ( ) blinks when the timer recording ended,
the TV program has not been completely recorded because of
an insufficient tape length. Press TIMER REC to cancel the
timer program or press EJECT to remove the cassette tape.
During timer recording standby mode, the VCR mode cannot be
operated. To use the VCR, press TIMER REC at first, then press
VCR DVD selector to change to VCR mode. After you use the
VCR, press TIMER REC again to put the VCR into timer
recording standby mode.
If you press TIMER REC during timer recording, the recording
operation will be interrupted. If you press TIMER REC again
within the programmed time, the recording operation will start
again.
After a power failure or disconnection of the power plug, all
programmed recording settings and time display will be lost
upon resumption of power. In this case, reset the clock
24
and
reprogram any timer recording.
Press VCR MENU. Select TIMER REC SET,
then press ENTER.
Preparation:
Press VCR DVD selector to select the VCR mode.
Load a cassette tape with the erase prevention tab
intact.
Check the time and date are correct
24
.
Example: Program a timer recording for the 26th day,
channel 125
(Cable TV), 11:00 - 11:30 PM on timer program
number 1 (Tape speed: SLP).
1
Press SET + or to select one of the program
line, then press ENTER.
2
Press SET + or to select the date, then press
ENTER.
3
Set the start time, end time, channel and tape
speed as in step 3.
4
MENU
ON
ON
OFF
OFF
TIMER REC SET
SAP
CH SETUP
SYSTEM SETUP
+//ENTER/MENU
AUTO REPEAT
+//ENTER/CANCEL/MENU
DATE START END CH
–––––– : –– : –– –––
–––––– : –– : –– –––
–––––– : –– : –– –––
–––––– : –– : –– –––
–––––– : –– : –– –––
–––––– : –– : –– –––
–––––– : –– : –– –––
26(SU)
11
:00
PM
11
:30
PM
125
SLP
+//ENTER/CANCEL/MENU
DATE START END CH
–––––– : –– : –– –––
–––––– : –– : –– –––
–––––– : –– : –– –––
–––––– : –– : –– –––
–––––– : –– : –– –––
–––––– : –– : –– –––
–––––– : –– : –– –––
26(SU)
11
:00
PM
11
:30
PM
125
SLP
To enter other programs, repeat step 2
through 4.
To return to the normal screen,
press VCR MENU twice.
5
Press TIMER REC. The timer symbol ( ) will
appear on the display and the VCR stands by
for recording.
At the same time, VCR mode will
change to DVD mode automatically.
You can use DVD even if the VCR is
in the timer recording mode.
If you do not use the DVD, turn the
power off.
6
Notes:
The timer recording will start at 5 seconds before the time
you predetermined.
If the timer symbol( ) does not appear on the display in
spite of the pressing of TIMER REC, the cassette may not
have been loaded.
29
If the cassette is ejected in spite of the pressing of TIMER
REC, the erase prevention tab of the cassette may have
been removed.
29
2,3
13
VCR DVD
TIMER REC
CANCEL
1,5
EJECT
+/
/ENTER/CANCEL/MENU
DATE START END CH
–––––– : –– : –– –––
–––––– : –– : –– –––
–––––– : –– : –– –––
–––––– : –– : –– –––
–––––– : –– : –– –––
–––––– : –– : –– –––
–––––– : –– : –– –––
–––––– : –– : –– –––
+/
/ENTER/CANCEL/MENU
DATE START END CH
–––––– : –– : –– –––
: –– : –– –––
–––––– : –– : –– –––
–––––– : –– : –– –––
–––––– : –– : –– –––
–––––– : –– : –– –––
–––––– : –– : –– –––
–––––– : –– : –– –––
26(SU)
SET
+
SET
CH
CH
+
ENTER
VCR MENU
SETUP
SET
+
SET
CH
CH
+
ENTER
SET
+
SET
CH
CH
+
ENTER
VCR MENU
SETUP
TIMER REC
J2D81701A (E)p32-37.p65 28/5/04, 1:40 PM37
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba SDK531 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba SDK531 in the language / languages: English as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info