10 -
English
Connections
SCART Cable
(not supplied)
RF cable
Aerial
1
2
3
Satellite Receiver or other Equipment
Aerial cable
TV
Connecting DVD-VCR to a
Satellite Receiver or Other
Equipment
You can connect your DVD-VCR to a Satellite
receiver or other DVD-VCR using the SCART cable
if the appropriate outputs are available on the
equipment chosen. The following illustrations give a
few examples of the connection possibilities.
1
AV2 IN: By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or
other equipment into the AV2 (DEC./EXT.) jack
on the rear of the DVD-VCR.
After making this connection, select the source
by pressing the INPUT SEL. button for the AV2
input sources.
2
AV(EURO AV) : By means of 21-pin Scart
Cable
Connect the end of the SCART cable to the
AV1(EURO AV) jack on the rear of the DVD-
VCR. Plug the other end into the appropriate
connector on the television. When using the
SCART cable, set the TV to audio/video mode
(AV).
3
By means of RF Cable
After making this connection, you must preset
the station received through the satellite tuner.
RF output channel of the satellite receiver
should be adjusted away from channel 36,
which is used by the DVD-VCR, e.g. re-adjust
to channel 33.
Connecting DVD-VCR
to the TV using the
Audio/Video Cable
You can connect your DVD-VCR to the television using
the audio/video cable if the appropriate input is available
on the television.
1
Connect one end of the video cable into the
VIDEO output jack on the rear of the DVD-VCR.
2
Plug the other end of the video cable into the
appropriate input connector on the television.
3
Connect one end of the audio cable supplied into
the AUDIO output jacks on the rear of the DVD-
VCR.
•Take care to respect the colour coding of the
left and right channels.
4
Plug the other end of the audio cables into the
appropriate input connectors on the television.
3
4
2
1
