41322
19
Zoom out
Zoom in
Previous page
1/72
Next page
19
Connections
AV
S
SELECT
P
I
VIDEO OUT AUDIO OUT
SUBWOOFER SURROUND
FRONT
CENTER
COAXIAL OPTICAL
DIGITAL
L
R
5.1CH
SURROUND
2CH BITSTREAM
/ PCM
VIDEO
Y
P
B
PR
AC IN
SELECT
P
I
SELECT
P
I
Notes
Refer to the owners manual of the connected equipment as
well.
When you connect the DVD player to other equipment, be
sure to turn off the power and unplug all of the equipment
from the wall outlet before making any connections.
If you place the DVD player near a tuner or radio, the radio
broadcast sound might be distorted. In this case, place the
DVD player away from the tuner and radio.
The output sound of the DVD player has a wide dynamic
range. Be sure to adjust the receivers volume to a moderate
listening level. Otherwise, the speakers may be damaged by
a sudden high volume sound.
Turn off the amplifier before you connect or disconnect the
DVD players power cord. If you leave the amplifier power on,
the speakers may be damaged.
Connecting to a TV (Using the component video jacks)
Signal flow
To PR video
input
To PB video
input
To Y video input
TV or monitor with component video
(PROGRESSIVE) inputs
or
TV or monitor with component video
(INTERLACED) inputs
PROGRESSIVE (525P (480P)) outputs/inputs
Some TVs or monitors are equipped with component
video inputs that are capable of reproducing a
progressively scanned video signal. Connecting to
these inputs allows you to view the high quality pictures
with less flicker.
Notes
To output video signals in the progressive format, set
PAL/Auto to Auto
60
.
A VIDEO CD recorded in the PAL system cannot be
viewed in the progressive output format. Video signals of
those discs are output always in the interlaced output
format.
INTERLACED outputs/inputs
Some TVs or monitors are equipped with component
video inputs. Connecting to these inputs allows you to
enjoy higher quality picture playback.
Actual labels for component video inputs may vary
depending on the TV manufacturer. (ex. Y, R-Y, B-Y or Y,
C
B, CR)
In some TVs or monitors, the color levels of the
playback picture may be reduced slightly or the tint may
change. In such a case, adjust the TV or monitor for
optimum performance.
To Y
VIDEO
OUT
To PR
VIDEO
OUT
To PB
VIDEO
OUT
To 2CH AUDIO OUT
(R: red, L: white)
To wall outlet
To audio input
Audio cable
Make the following setting.
TV
TV or monitor
with component
video inputs
See Customizing the Function Settings
beginning from
56
.
Setting
Video Out Select
60
Audio Out Select
61
Bitstream or PCM
Video
or
S Video
Power cord
Switching the output signal (interlaced/
progressive) using the remote control
(only when the SELECT (I/P) switch is set to “P”)
You can temporarily switch the output signal for better
picture quality.
Press Y/PB/PR SELECTOR on the remote control.
Set to P.
Set to I.
* After setting this switch (I/P), be sure to
power off the DVD player then turn it on
to activate the setting.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba SD-510EB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba SD-510EB in the language / languages: English as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info