617367
34
Zoom out
Zoom in
Previous page
1/60
Next page
34
To pause playback (still mode)
Press PAUSE/STEP during playback.
To resume normal playback, press
PLAY.
The sound is muted during still
mode.
To stop playback
Press STOP.
To remove the disc
Press OPEN/CLOSE.
Remove the disc after the disc tray
opens completely.
Be sure to press OPEN/CLOSE to close the disc
tray after you remove the disc.
Notes:
If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the
TV screen according to the type of loaded disc. In this case, check your disc again (see page 6 and 52).
Some discs may take a minute or so to start playback.
When you set a single-faced disc label downwards (i.e. the wrong way up) and press OPEN/CLOSE or PLAY
on the unit, “Reading” will appear on the display for a few minutes and then “Incorrect Disc” will continue to be
displayed.
Some discs may not work the resuming facility.
Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC,
see page 42.
Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays
DVDs according to the disc contents the software producers designed, some playback features may not be
available. Also refer to the instructions supplied with the DVDs.
Do not move the unit during playback. Doing so may damage the disc.
Use the OPEN/CLOSE to open and close the disc tray. Do not push the disc tray while it is moving. Doing so
may cause the unit to malfunction.
Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the
unit to malfunction.
In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of
an on-screen menu may damage your television set, permanently etching that image onto its screen. To avoid
this, be sure to press POWER on your remote control once the movie is completed.
There may be a slight delay between the button is pressed and the function activates.
To obtain a higher quality picture
Occasionally, some picture noise not usually visible on the TV screen during a normal broadcast may appear
while playing a DVD video disc. It is because due to high resolution pictures on these discs which include a
lot of information. The amount of noise depends on the TV you use with this unit. You should generally
reduce the sharpness adjustment on your TV when viewing DVD video discs.
Playing a Disc while the VCR section is
recording or standing by for timer recording
1) Start to record.
Follow steps 1~4 on page 25.
If the DVD/VCR is standing by for recording, turn
on the DVD/VCR.
2) Press VCR/DVD to select DVD mode.
3) Play a disc.
Follow steps 3 ~ 5 on page 33.
Press PLAY if the DVD/VCR does not start to play
a disc automatically.
4) Stop playback.
Press STOP to stop playing a disc.
Screen saver function
The screen saver operates when you leave the unit
in DVD stop mode for approx. five minutes.
The screen will repeatedly get dark gradually and
back to normal.
Please press any button when you want to return to
an usual screen.
To turn on or off the screen saver, see page 51.
Playing a disc
2J50101A [EN] P33-36 3/6/06, 9:43 PM34
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba SD-37 VBSB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba SD-37 VBSB in the language / languages: English as an attachment in your email.

The manual is 3,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info