749196

Toshiba SD-24VBSB Manual

36
Zoom out
Zoom in
Previous page
1/41
Next page
1-41
Cause
zThe power cord is disconnected
zDVD or VCR button is not switched
properly.
zNo disc is inserted.
zNo tape is inserted.
zThe TV is not set to receive DVD+VCR
signal output.
zThe video cable is not connected
securely.
zThe Progressive Scan is set to On on
the setup menu but is connected to a
standard(analog) television.
zThe equipment connected with the
audio cable is not set to receive
DVD+VCR signal output.
zThe audio cables are not connected
securely.
zThe power of the equipment connected
with the audio cable is turned off.
zThe Digital Audio Output is set to the
wrong position.
zThe disc is dirty.
zThe TV channels are not tuned in properly
zTape heads are dirty.
zTape is a rental or was recorded on
another VCR.
zThis unit can only output 625p
Progressive scan picture.
zAn unplayable disc is inserted.
zThe disc is placed upside down.
zThe disc is not placed within the guide.
zThe disc is dirty.
zThe Rating level is set.
zIs the cassette compartment empty?
zAudio mode is not set properly.
zNICAM mode is not set properly.
Correction
zPlug the power cord into the wall outlet
securely.
zRefer to page 6.
zInsert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
zSelect the appropriate video input mode
on the TV so the picture from the
DVD+VCR player appears on the TV
screen.
zConnect the video cable into the jacks
securely.
zSet Progressive Scan to Off
(see page 19).
zSelect the correct input mode of the
audio receiver so you can listen to the
sound from the DVD+VCR player.
zConnect the audio cable into the jacks
securely.
zTurn on the equipment connected with
the audio cable.
zSet the Digital Audio Output to the
correct position, then turn on the
DVD+VCR player again by pressing
++//11.
zClean the disc.
zCheck tuning, carry out tuning again.
zClean video heads.
zUse PR/TRK (+/-) for manual tracking
adjustment while tape is playing.
zMake sure that your TV can support
625p Progressive scan picture or set
Progressive scan to off.
zInsert a playable disc. (Check the disc
type and Regional code.)
zPlace the disc with the playback side
down.
zPlace the disc on the disc tray correctly
inside the guide.
zClean the disc.
zCancel the Rating function or change
the rating level.
zEject the tape in.
zSelect STEREO by repeatedly pressing
AUDIO on the remote control.
zMake sure NICAM in the menu is set to
AUTO for the station to be recorded.
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Symptom
No power.
The power is on, but
the DVD+VCR player
does not work.
No picture.
No sound.
The playback picture is
poor.
The DVD+VCR player
does not start playback.
Video tape cannot be
inserted.
No Hi-Fi sound
No NICAM sound
recording
Downloaded from www.Manualslib.com manuals search engine
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba SD-24VBSB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba SD-24VBSB in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info