749196

Toshiba SD-24VBSB Manual

11
Zoom out
Zoom in
Previous page
1/41
Next page
1-16
Connections
Tips
zzDepending on your TV and other equipment you wish
to connect, there are various ways you could connect
the unit.
zzPlease refer to the manuals of your TV, Stereo
System or other devices as necessary to make the
best connections.
zzFor better sound reproduction, connect this unit’s
AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment.
See “Connecting to Optional Equipment” on page 12.
Caution
– Make sure this unit is connected directly to the TV.
Set the TV to the correct video input channel.
– Do not connect this unit’s AUDIO OUT jack to the
phono in jack (record deck) of your audio system.
Connecting to a TV
zzMake one of the following connections, depending on
the capabilities of your existing equipment.
zzWhen using the SCART’s RGB signal, set the video
output switch to RGB. When using the COMPO-
NENT/PROGRESSIVE SCAN VIDEO OUT jacks, set
the video output switch to COMPONENT.
zzRGB signal is only exclusive for DVD playback.
Basic connection (AV)
11
Connect the EURO AV1 AUDIO/VIDEO on the rear
panel of this unit to the SCART input socket on the
TV using a SCART lead.
For TV without SCART, connect the yellow VIDEO
OUT jack and DVD/VCR AUDIO OUT jacks of this
unit to the TV.
22
Some TV broadcasters transmit encoded television
signals which you can only see with a purchased or
rented decoder. You can connect such a decoder
(descrambler) to this unit.
Basic connection (RF)
11
Connect the RF antenna cable from your indoor/
outdoor antenna to AERIAL jack on the rear panel
of this unit.
22
Connect the supplied RF antenna cable from the
RF.OUT (DVD/VCR OUT) jack on the rear panel of
this unit to your television’s Antenna Input.
S-Video connection
11
Connect the S-VIDEO OUT jack on this unit to the
S-Video in jack on the TV using the S-Video cable
(not supplied).
22
Connect the Left and Right AUDIO OUT (DVD
EXCLUSIVE OUT) jacks of this unit to the audio
left/right in jacks on the TV using the audio cables.
Component (Color Stream®) / Progressive Scan
(ColorStream®pro) Video connection
(DVD EXCLUSIVE OUT)
11
Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT/(DVD EXCLUSIVE OUT) jacks on the
DVD+VCR to the corresponding in jacks on the TV
using an Y Pb Pr cable (not supplied).
22
Connect the Left and Right AUDIO OUT (DVD
EXCLUSIVE OUT) jacks of the DVD+VCR to the
audio left/right in jacks on the TV using the audio
cables.
Notes
zIf your television is a high-definition or “digital ready” televi-
sion, you may take advantage of the DVD+VCR’s progres-
sive scan output for the highest video resolution possible.
zSet the Progressive Scan to “On” on the setup menu for pro-
gressive scan signal, see page 19.
zWhen you use Component Video signal (interlace mode), set
the Progressive Scan to “Off” on the setup menu.
zIf you set Progressive Scan to ON in error, you must reset
the DVD+VCR. First, remove the disc in the DVD+VCR.
Next, press STOP (x) and hold it for five seconds before
releasing it. The video output will be restored to the standard
setting, and a picture will once again be visible on a conven-
tional analog TV or monitor.
zProgressive scan on does not work with the analog video
connections (yellow VIDEO OUT jack or S-VIDEO OUT
jack).
zIf the TV has an S-video input, connect the DVD player with
the S-video cable. When using an S-video cable, do not con-
nect the yellow video cable.
PREPARATION
Rear of TV
S-
VIDEO OUT
VIDEO INAERIAL AUDIO INPUT
L
R
SCART INPUT
COMPONENT/PROGRESSIVE SCAN VIDEO INPUT
Pr Pb Y
Rear of this unit (Component/Progressive scan Video connection)
Rear of this unit (Basic connection)
Satellite or Set Top Box
Downloaded from www.Manualslib.com manuals search engine
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba SD-24VBSB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba SD-24VBSB in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info