138076
43
Zoom out
Zoom in
Previous page
1/47
Next page
43
Others
Before Calling Service Personnel
Check the following guide for the possible cause of a problem before contacting service.
Symptoms and correction
Symptom
No power.
The DVD video player turned
off by itself.
No picture.
No sound.
The playback picture has
occasional distortion.
Brightness is unstable or
noises are present in the
playback pictures.
The DVD video player does
not start playback.
Playback does not follow the
course of the disc’s program.
Buttons do not work.
The remote control does not
work properly.
Cause
The power plug is disconnected.
The automatic power off function turned
the unit off.
The TV is not set to receive DVD signal
output.
The video cable is not connected securely.
The equipment connected with the audio
cable is not set to receive DVD signal
output.
The audio cable is not connected securely.
The audio receiver or TV is turned off.
The setting of output sound format is
incorrect.
The disc is dirty.
It is in fast forward or fast reverse
playback.
The effect of copy protection.
No disc is inserted.
An unplayable disc is inserted.
The disc is placed upside down.
The disc is not placed within the guide.
The disc is dirty.
The parental lock function is set.
It is in the mode of repeat playback,
memory playback, etc.
Power supply fluctuations or other
abnormalities such as static electricity may
interrupt correct operations.
The remote control is not pointed at the
remote sensor of the DVD video player.
The remote control is too far from the DVD
video player.
The batteries in the remote control are
exhausted.
Correction
Connect the power plug securely into the
wall outlet.
Press the PLAY button.
Select the appropriate video input mode
on the TV so the picture from the DVD
video player appears on the TV screen.
Connect the video cable securely into the
appropriate jacks.
Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD video player.
Connect the audio cable securely into the
appropriate jacks.
Turn on the equipment connected with
the audio cable.
Select the proper audio setting.
Eject the disc and clean it.
Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
Connect the DVD video player directly to
the TV. Avoid connecting the DVD video
player to a VCR or TV/VCR combination.
Insert a disc.
Insert a playable disc. (Check the disc
type and color system.)
Place the disc with the playback side
down.
Place the disc correctly inside the guide
on the disc tray.
Clean the disc.
Cancel the parental lock function or
change the parental lock level.
These operations may prevent a proper
progress of the contents.
Turn the power on or off with the ON/
STANDBY button. Or disconnect the power
plug and insert it into the wall outlet again.
Point the remote control at the remote
sensor of the DVD video player.
Operate the remote control within about
7 m.
Replace the batteries with new ones.
Page
16
21
20
16, 17
20
16, 17
18, 19
20
33, 35
39
9
16
20
10
20
20
9
35, 40
15
15
15
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba sd 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba sd 100 in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info