465045
69
Zoom out
Zoom in
Previous page
1/84
Next page
69
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VHS Functions
Basic Setup /
TV View Operation
PCM sampling (Default: 48kHz)
Note
When playing back a disc with copyright protection:
Even if you select “96kHz”, the sound is down sampled
to 48 kHz.
Dolby Digital conversion (Default: Stream)
Note
When playing back a DVD-RW disc recorded in VR mode:
If the audio source on a disc is in Dolby Digital format,
set “Dolby Digital” to “PCM” so that you can switch to
main audio (L), sub audio (R), or a combination of both
(L / R) using your amplifier / decoder.
Settings for MPEG (Default: PCM) (DVD only)
Settings for DTS (Default: ON) (DVD only)
Set “Disc Menu Language”.
Set “Audio Language”.
Note
If “Original” is selected, the audio language is the default
of the inserted disc.
“Audio Language” setting may not be available for some
discs.
Set “Subtitle Language”.
If “Other” is selected, enter the appropriate 4-
digit code using [the Number buttons].
Refer to “Language Code” on page 82.
When you finish entering the code, press
[ENTER\OK].
Note
You can also change or switch off the subtitles on a DVD
from the disc menu if it is available.
•Press [CLEAR] or [{] to erase numbers entered
incorrectly.
You can only select the languages supported by the
inserted disc.
Set to “ON” to show the angle icon during the playback.
48kHz : If your amplifier / decoder is NOT compatible
with 96 kHz PCM, select “48kHz”. Sound
recorded at 96 kHz is down sampled to 48 kHz.
96kHz : If your amplifier / decoder is compatible with
96 kHz PCM, select “96kHz”. Sound is sampled
at 96 kHz.
PCM : Converts the Dolby Digital into PCM
(2 channel).
If your amplifier / decoder is NOT compatible
with Dolby Digital, set to “PCM”.
Stream : Outputs Dolby Digital signals.
If your amplifier / decoder is compatible with
Dolby Digital, set to “Stream”.
PCM : Converts MPEG into PCM.
If your amplifier / decoder is NOT compatible
with MPEG, set to “PCM”.
Stream : Outputs MPEG Audio signals.
If your amplifier / decoder is compatible with
MPEG, set to “Stream”.
ON : Outputs DTS signals.
If your amplifier / decoder is compatible with
DTS, set to “ON”.
OFF : No DTS signal is output.
If your amplifier / decoder is NOT compatible with
DTS, set to “OFF”.
PCM
48kHz
96kHz
Dol y Digital
PCM
Stream
b
MPEG
PCM
Stream
DTS
ON
OFF
C Disc Menu Language (Default: French)
(DVD only)
D Audio Language (Default: Original)
(DVD only)
E Subtitle Language (Default: OFF)
(DVD only)
F Angle Icon (Default: ON) (DVD only)
Disc Menu Language
French
English
Spanish
German
Italian
Other
Audio Language
Original
French
English
Spanish
German
Italian
Other
Subtitle Language
OFF
French
English
Spanish
German
Italian
Other
----
Code Input
Angle Icon
ON
OFF
E3TK0FD_EN.book Page 69 Monday, March 9, 2009 10:00 AM
69


Need help? Post your question in this forum.

Forumrules
1

Forum

toshiba-rdxv49

Reset search

  • Please what is the name of remote control for Toshiba videorecorder rdxv49dtkf? Many thanks for answer. John Submitted on 19-12-2021 at 21:38

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba RDXV49 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba RDXV49 in the language / languages: English as an attachment in your email.

The manual is 10,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info