Manual Toshiba RDXV49 (page 34 of 84) (English)

465045

Zoom out

Zoom in

1/84

5 Select the digital (DVB) / analogue (ATV) mode

or external input (AV1/AV2) using [K \ L], then

press [B].

6 Select the channel number to record using

[K \ L], then press [B].

7 Select the recording media (“HDD” or “DVD”)

using [K \ L], then press [B].

8 Select the recording mode using [K \ L], then

press [B].

Refer to “Recording Mode” on page 28.

Select “STTL” to “ON” or “OFF” using [K \ L].

If you set “STTL” to “ON”, subtitle will be recorded too.

• When analogue channel is selected, “VPS/PDC” will be

displayed instead of “STTL”.

Select “VPS/PDC” to “ON” or “OFF” using

[K \ L].

Refer to “VPS (Video Programme System) / PDC

(Programme Delivery Control)” on this page.

• When DVB channel is selected, “STTL” will be displayed

instead of “VPS/PDC”.

• VPS/PDC system is only available for HDD.

• VPS/PDC system is not available for “Daily” and “M-F”

timer programme.

10 Press [ENTER\OK] when all information

required is entered.

Your programme setting is stored.

• To set another programme, repeat steps

2 to 10.

• To exit, press [TIMER PROG.].

• When 2 or more programmes are overlapped, “Timer

programme overlapped” appears, and the overlapped

programme will be displayed in blue. To correct the timer

programme, refer to “Checking, Cancelling or Correcting

the Timer Programming Information” on this page.

The icon will appear on the front panel display.

Note

• If you have not set the clock, the clock setting window will

appear instead of the Timer Programming list. Continue

from “Clock Setting” on page 71 before programming the

timer.

•Press [K \ L] to move the cursor in “Timer Programming”

list.

• If you have a timer programme with VPS/PDC function, and

if you are watching different channel from the timer

programme, confirmation message to change the channel

will appear 15 minutes before the programme starts (the

message will also re-appear 30 seconds before the

programme starts). The channel will automatically be

changed to the programmed channel 15 seconds before the

programme starts.

Alternate recording (DVD only)...

If there is no recordable disc in the unit, if the disc does not

have enough space to complete the recording, or if the

material is “copy-once” programme and prohibited to be

recorded on a DVD in the unit, the unit will detect it and

automatically record to the HDD even when DVD is selected

as the recording media. If the available space on the HDD is

less than that of DVD, the unit will not perform the alternate

recording. This feature is available only for timer recording.

Not available for one-touch timer recording.

The Video Programme System (VPS) or Programme Delivery

Control (PDC) assures that the TV programmes you have

programmed for timer recording are recorded exactly from

beginning to end, even if the actual broadcasting time differs

from the scheduled time due to a delayed start or extension of

the programme duration. Furthermore, if a programme is

interrupted, the recording will also be interrupted

automatically and resumed when the programme starts again.

If the VPS/PDC signal drops out because the broadcast signal

is weak, or if a broadcasting station does not transmit a

regular VPS/PDC signal, the timer recording is performed in

normal mode (without VPS/PDC) even if it was programmed

for VPS/PDC. If the starting time of the VPS/PDC timer

recording is between 0:00 and 3:59 on a given day, the VPS/

PDC function will operate from 20:00 on the previous day to

4:00 on the next day. If the starting time of the VPS/PDC timer

recording is between 4:00 and 23:59 on a given day, the VPS/

PDC function will operate from 0:00 on the given day to 4:00

on the next day. This means that if the relevant programme is

broadcasted within this period, it is recorded correctly. If the

timer is not programmed correctly, the incorrect timer setting

stays in effect unless you cancel it. To cancel an incorrect

timer setting, refer to “Checking, Cancelling or Correcting the

Timer Programming Information” on this page.

Note

• This feature is only available for analogue channels.

1 Press [TIMER PROG.].

2 A) To delete the timer programme:

1) Select the programme you want to delete using

[K \ L], then press [ENTER\OK].

2) Select “Delete” using [K \ L], then press

[ENTER\OK].

Confirmation window will appear.

3) Select “Yes” using [K \ L], then press [ENTER\OK].

B) To correct the timer programme:

1) Select the programme you want to correct using

[K \ L], then press [ENTER\OK].

2) Select “Programme Change” using [K \ L], then press

[ENTER\OK].

3) Correct the timer programme by using [K \ L \ { \ B],

then press [ENTER\OK].

3 Press [TIMER PROG.] to exit.

To check the timer programming in progress

Press [TIMER PROG.].

9 For DVB channel recording:

For analogue channel recording:

1/1

03/120:00

06/12

07/12

7:00

9:00

17:00

9:00

9:30

18:00

DVB 18

DVB 190

1 TF1

Timer Programming

Date Start End CH

New Programme

STTL

VPS/PDC

THU

VPS (Video Programme System) / PDC

(Programme Delivery Control)

Checking, Cancelling or Correcting the

Timer Programming Information

E3TK0FD_EN.book Page 34 Monday, March 9, 2009 10:00 AM

Please what is the name of remote control for Toshiba videorecorder rdxv49dtkf? Many thanks for answer. John Submitted on 19-12-2021 at 21:38
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba RDXV49 in the language / languages: English as an attachment in your email.

The manual is 10,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Toshiba RDXV49 Manual

Product: