Manual Toshiba RDXV49 (page 22 of 84) (English)

465045

Zoom out

Zoom in

1/84

9 Select “Channel” using [K \ L], then press [B].

10 Press [K \ L] to start scanning.

• The tuner will begin to search up or down automatically.

When a channel is found, the unit will stop searching

and the picture will appear on the TV screen.

• You can select a desired channel number using

[the Number buttons]. Refer to the following Channel

Plan table and press the three digits to select the

channel number. (To select channel 4, press [0] first and

then press [0] and [4]. Or press [4] and then “– – 4”

appears and wait for 2 seconds.)

• If desired channel is found, press [{].

[L (SECAM-L)]

[BG (PAL-B/G)]

This unit can receive the Hyper and Oscar frequency

bands.

• If you want to decode scrambled signals, select

“Decoder” using [K \ L], then press [B]. Select “ON”

using [K \ L], then press [{].

• If “Skip” is set to “ON”, select “Skip” using [K \ L], then

press [B]. Select “OFF” using [K \ L], then press [{].

• To store another channel, repeat steps

5 to 10.

11 Press [SETUP] to exit.

You can set the unit to skip channels. You can no longer

receive or watch when you access channels using

[PROG. G\H].

1 Follow steps 1 to 4 in “Manual Tuning

(ANALOG)” on page 21.

2 Select “Position” using [K \ L], then press [B].

3 Select the position number using

[the Number buttons] or [K \ L], then press [{].

4 Select “Skip” using [K \ L], then press [B].

5 Select “ON” using [K \ L], then press [{].

• To skip another channel, repeat steps 2 to 5.

6 Press [SETUP] to exit.

You can replace two channels.

1 In stop mode, press [SETUP]. Select “General

Setting” using [K \ L], then press [ENTER\OK].

2 Select “Channel” using [K \ L], then press

[ENTER\OK].

3 Select “ANALOG Channel Setup” using [K \ L],

then press [ENTER\OK].

4 Select “Move” using [K \ L], then press

[ENTER\OK].

5 Select the position number to change the

channel using [K \ L], then press [ENTER\OK].

You cannot select a position number where “– – –”

appears next to the number, because “Skip” is set to “ON”

for that position number.

6 Move the channel to another position number

using [K \ L], then press [ENTER\OK].

• To move another channel, repeat steps 5 to 6.

7 Press [SETUP] to exit.

You can programme the tuner to scan only the DVB channels

that you can receive in your area.

1 In stop mode, press [SETUP]. Select “General

Setting” using [K \ L], then press [ENTER\OK].

2 Select “Channel” using [K \ L], then press

[ENTER\OK].

3 Select “DVB Channel Setup” using [K \ L], then

press [ENTER\OK].

4 Select “Auto Tuning” using [K \ L], then press

[ENTER\OK].

The unit will start storing channels available in your area.

The tuner scans and memorises all the active DVB

channels (TV / Radio) in your area.

Channel Plan

CH Indication TV Channel

1 – 10 F1 - F10

21 – 69 E21 – E69

74 – 86 B – Q

90 – 106 S4 – S20

121 – 141 S21 – S41

Channel Plan

CH Indication TV Channel

2 – 12 E2 - E12

13 – 20 A – H (only ITALY)

21 – 69 E21 – E69

74 – 78 X, Y, Z, Z+1, Z+2

80 – 99, 100 S1 – S20, GAP

121 – 141 S21 – S41

Skip a Preset Channel

ANALOG

Move

ANALOG

Auto Tuning (DVB)

DVB

$6"#HANNEL3ETUP

%DIT#HANNELS

!UTO4UNING

-ANUAL4UNING

3IGNAL)NFORMATION

100%

Progress

Channel Search

S.No. TV Channel

More4

Film4+1

ITV4

CITV

SETANTA SPORT

102

729

728

Teletext Cars

RadioMusicShop

Heart

S.No. Radio Channel

Channel 69 UHF 858000KHz/8M

Exit

RETURN

Back

E3TK0FD_EN.book Page 22 Monday, March 9, 2009 10:00 AM

Please what is the name of remote control for Toshiba videorecorder rdxv49dtkf? Many thanks for answer. John Submitted on 19-12-2021 at 21:38
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba RDXV49 in the language / languages: English as an attachment in your email.

The manual is 10,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Toshiba RDXV49 Manual

Product: