37379
105
Zoom out
Zoom in
Previous page
1/111
Next page
105
EN
Introduction Connections Basic Setup Playback
Editing
VCR Functions Others
Function Setup
Recording
T
Symptom Solution
POWER
The power does not turn on. Check that the AC power cord is connected securely.
• Batteries of the remote control are weak.
The unit turns on automatically without any
operation.
• The unit turns on automatically 2 minutes before the Timer Recording.
The OSD Language Menu appears every
time the power turns on.
• Finish up the Language Setting procedure by selecting a language in the
OSD Language Menu. Press [ENTER] to activate the setting.
The power turns off automatically. • The power turns off automatically when abnormality is detected on the
disc. Press [ ON / STANDBY] or [OPEN / CLOSE O] on the unit to
open the disc tray, and before it is opened completely, press the button
again. Then take out the disc.
• The power turns off automatically when an OTR is completed.
Symptom Solution
GENERAL
The unit does not function. ” or error message appears if the operation is prohibited.
• Batteries of the remote control are weak or exhausted.
No picture, sound or menu appears on the
screen.
• Check if the connections are made securely and correctly.
• Check if the cables are damaged.
• Check if a correct external input channel is selected on your TV. (See
page 25.)
• Check if you have completed the Channel Setting. (See pages 27 to 30.)
Clock Setting and Channel Setting cannot be
performed.
• If a recording is in progress, these operations cannot be performed.
The unit does not operate properly. Moisture has condensed inside the unit. Remove the disc and leave the
unit turned on for about two hours until the moisture evaporates. (See
page 3.)
Symptom Solution
CHANNEL
TV channels cannot be changed. • Check if the connections are made securely and correctly.
• Check if the cables are damaged.
• Try Channel Setting by following the steps on pages 27 to 30.
Only specific channels do not appear. • The channels may be set to be skipped. (See page 28.)
The external input channels (such as AV1,
AV2 or AV3) cannot be skipped.
• This unit does not skip the external input channels. This is not a
malfunction.
Symptom Solution
RECORDING
GENERAL
The image from the external device
cannot be displayed or recorded.
• Try pressing [INPUT SELECT ] repeatedly.
• Turn on all connected devices.
• Check if the connections are made securely and correctly.
HDD/DVD
Recording is impossible. • This unit cannot record programmes that contain copy protection signal.
This is not a malfunction.
• The space of the recording media may be used up. Try deleting
unnecessary titles from the Original, or exchange it with the recordable
media.
• The maximum number of titles or chapters has exceeded.
Delete the unnecessary titles to make enough space or insert a new
recordable media.
• Check if the connections are made securely and correctly.
Timer Recording cannot be performed. • The internal clock of the unit may have been stopped due to a power
failure that lasted for more than 30 seconds. Reset the clock. (See pages
30 to 31.)
DVD
Recording is impossible. • Copy-once programmes can only be recorded on a CPRM compatible
VR mode DVD-RW.
• Check if the disc is protected or finalised. Undo the protection or the
finalisation.
• DVD-RW once formatted with other DVD recorders cannot be recorded
on this unit. This is not a malfunction.
• Video mode DVDs recorded by other DVD recorders cannot be used on
this unit unless finalised.
• Check if the connections are made securely and correctly.
VCR
Recording is impossible.
• Check if a videotape is inserted.
• Check if a videotape has a record tab intact.
E3B90ED_EN.book Page 105 Friday, February 23, 2007 12:38 PM
105


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba RD-XV47KE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba RD-XV47KE in the language / languages: English as an attachment in your email.

The manual is 4,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba RD-XV47KE

Toshiba RD-XV47KE User Manual - German - 111 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info