Manual Toshiba RD-XV47KE (page 44 of 111) (English)

37379

Zoom out

Zoom in

1/111

3 Recording Date:

When press [Cursor D] at the current date, the

setting will change as follows.

e.g., 1st January

Skip:

Select this item only when you want to deactivate

the periodical (Daily, Mon-Fri or Weekly) Timer

Recording temporarily. To do so, move the cursor

to the Skip section and then press

[Cursor

U / D].

Check mark will appear and press [ENTER] to

activate the setting.

4 Start Time:

5 End Time:

6 Rec Mode:

Refer to “Rec Mode” on page 35.

7 Recording Media (HDD or DVD):

To record onto the HDD, select “HDD”. To record

onto a disc, select “DVD”. VCR is not compatible

with Timer Recording.

8 VPS/PDC system:

Refer to “VPS (Video Programme System) / PDC

(Programme Delivery Control)” on page 45.

• VPS/PDC system is only available for HDD.

• VPS/PDC system is not available for periodical

timer programme.

3 Select an item to set using

[Cursor

L / P], and set the contents

to suit your preference using

[Cursor

U / D].

4 Press [ENTER] when all the

information is entered.

The icon will appear on the Front Panel

Display indicating one or more Timer Recordings

are in standby.

•Press [CLEAR] will reset all the entered

information.

• To set another programme, repeat steps 2 to 4.

• When programmes are overlapped, a warning

message “All or part of the programme will not

be recorded.” will appear.

- When icon appears, a part of the programme

will not be recorded.

- When icon appears, the whole programme

will be recorded.

For details on overlapped Timer Programmings,

refer to “Hints for Timer Recording” on page 45.

5 Press [TIMER PROG.] to exit.

• You can also press [SETUP] twice to exit.

• If you press [ ON / STANDBY] to turn the

unit to standby mode, it will turn on 2 minutes

before the programmed recording time, and

start recording at the programmed recording

time. When the recording is completed, the unit

will ask you whether to turn off the unit.

The unit will be turned off automatically if you

select “Yes” or if you do not reply in 1 minute.

• To stop recording in progress, press [STOP S].

Confirmation message will appear. Select “Yes”

using [Cursor

L / P].

Relay Recording:

When you Timer Record to DVD, the unit

automatically changes the recording media to

HDD under the conditions listed below:

- when there is no recordable disc in the unit.

- when the disc does not have enough space for

the recording.

- if the unit is formatting or finalising a disc.

This feature is available only for Timer Recording

but not for OTR.

Note

• If you have not set the clock, the clock setting

window will appear instead of Timer Programme List

at step 1. Continue from step 3 in “Setting the Clock”

on page 30 before programming the timer.

• If a basic recording or One-touch Timer Recording is

in progress on the VCR and the Timer Recording set

for HDD or DVD is about to begin, the unit will

automatically switch to the programmed channel

within 15 seconds before the programmed time, and

the recording in progress on the VCR will be

cancelled UNLESS their recording channel is the

same. If their recording channel is the same, the

Timer Recording for HDD or DVD will start without

cancelling the recording currently in progress on the

VCR. In this case, the recording of the same

channel will be made on both VCR and the HDD or

DVD.

• The maximum recordable duration is 7 hours for

Video mode discs, 8.5 hours for VR mode discs and

5 hours for +VR mode discs.

• If the recording time exceeds 12 hours, a Timer

Recording cannot be set.

• If the starting time you entered is already in the past,

the recording will start as soon as you activate the

Timer Recording by pressing [ENTER] at step 4.

• If playback and recording are in progress at the

same time, select the appropriate device by

pressing [HDD], [DVD] or [VCR] before you press

[PAUSE p] or [STOP S] to pause or stop the

operation.

• When the Timer Recording is finished, confirmation

message will appear. If there is no signal for about

1 minute, unit will turn off automatically.

• If DVD+RW / R were used for the Timer

Programming with SLP mode, the Rec Mode will

change to EP mode.

• When VPS / PDC is set to “On” for timer recording,

you may hear some noise from the unit while the unit

is in timer standby mode. This is not a malfunction.

Daily

M-F

01/01

31/01

W-Sat

W-Fri

W-Sun

Weekly recording

E3B90ED_EN.book Page 44 Friday, February 23, 2007 12:38 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba RD-XV47KE in the language / languages: English as an attachment in your email.

The manual is 4,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba RD-XV47KE

Toshiba RD-XV47KE User Manual - German - 111 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Toshiba RD-XV47KE Manual

Product: