462436

Toshiba RD-SX32SC Manual

162
Zoom out
Zoom in
Previous page
1/179
Next page
162
Aspect ratio(Video mode)
DVD-RW
DVD-R
To set the aspect ratio when recording onto a DVD-R/RW
disc.
4:3:
Fixes the aspect ratio at 4:3.
16:9:
Fixes the aspect ratio at 16:9.
Note
• When the bit rate on “AV record quality” is set to
“1.4(Mbps)”, pictures are recorded in 4:3 aspect ratio even
if “16:9” is selected.
DVD compatible mode
DVD-RDVD-RW
HDD
DVD-RAM
To set whether or not recording is to be performed in the
format for which recording is allowed by the DVD-Video
standard (video, audio and other data) during recording.
This selection is important for contents when recorded on
this recorder, if they will be copied to DVD-R/RW.
Off:
For recording of contents which will not be copied to
DVD-R/RW.
Both the main and SAP sounds are recorded.
When recording directly on a DVD-R/RW disc, this is
ineffective. The recorder will automatically regard this
as “Main,” and record sound of the main channel only
in stereo. Select “Main” or “SAP” for a DVD-R/RW
recording.
Main:
Records sound of the main channel only in stereo.
SAP:
Records sound of the SAP channel only in stereo.
Notes
• When you select the manual rate of the picture quality
between 3.0 and 3.8 and set this mode to “Main” or “SAP”,
the picture quality may become lower than when you set
this mode to “Off”.
• You can change the setting from the Quick Menu.
• It is no use to make this selection when dubbing. Select
when recording.
DVD-Video:CHP create
DVD-RW
DVD-R
To set whether chapters are to be automatically created
at a selected interval during DVD-R/RW recording.
Off:
Chapters are not set.
5 min. : 10 min. : 15 min. : 20 min.
To set the interval at which chapters are automatically
created to 5, 10, 15 or 20 minutes.
Note
• The number of chapters has the upper limit, which varies
depending on the disc condition. If the number reaches it,
no more chapters are created.
Rec DNR
DVD-RDVD-RW
HDD
DVD-RAM
Selects the level of 3D digital noise reduction that can
reduce noises of a picture with many noise, depending
on pictures.
Off:
Deactivates the 3D digital noise reduction.
On:
Sets the normal level.
Expanded:
Increases digital noise reduction.
Notes
• When you set “Rec DNR” to “On” or “Expanded” and set
“3D Y/C Separation” to “On”, the priority changes
depending on the input selection if you select the S-video
input. “Rec DNR” has priority, when you select the built-in
tuner or composite input, “3D Y/C Separation” has priority.
• If you want to avoid an afterimage, set this setting to “Off”.
3D Y/C separation
DVD-RDVD-RW
HDD
DVD-RAM
The 3D digital comb filter executes Y/C (Brightness/
Color) separation to reduce the color irregularity or cross
color interference.
Off:
Deactivates this function.
In an area where the broadcast reception is poor,
select this mode.
On:
Activates this function.
In normal conditions, select this.
Note
• Refer to the “Notes” in the above “Rec DNR”.
Customizing the function settings (Continued)
Function Setup
… 162 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba RD-SX32SC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba RD-SX32SC in the language / languages: English as an attachment in your email.

The manual is 4,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info