497499
36
Zoom out
Zoom in
Previous page
1/59
Next page
36
9-3. Troubleshooting Flowcharts
9-3-1. Power can not be Turned on (No Operation at All)
<Preliminary checks>
(1) Is the supply voltage normal?
(2) Is the connection to the AC output OK.?
*
Be sure to disconnect the motor connector CN10 after shut off the power supply, or it will be a cause of
damage of the motor.
P.C. board
is defective.
Symptom
Operation
Check Items
Main cause
Countermeasure
Shut off the power supply
from AC outlet once and
turn it on after 5 seconds.
Does the OPERATION
lamp blink?
Does the transmission
indicator of remote
control flash normally and
transmit certainly?
Remote control
is defective.
Replace the
remote control.
(No problem)
Does the fuse
(F01) blow?
Replace the main
P.C. board.
Wrong wiring of
AC cord or connecting
cable is defective.
Replace the
thermal fuse set.
Check connection.
Is the indication voltage
(DC12V or 5V) of main
PC board correct?
Is the voltage
across C02 measured
DC310V~340V?
Refer to the paragraph
Pre-check, or defective circuit
before power P.C. board block.
Shut off the power
supply once, and turn
it on again after dis-
connecting the motor
connector CN10
*
.
Is the
secondary voltage
of SW transformer
measured DC12V,
and DC7V?
Motor is defective.
Is the secondary
voltage of SW
transformer (T01)
measured DC12V,
and DC7V ?
YES
SW transformer
(T01) or Tr (Q01)
for power supply
is defective.
Parts (R21, R22, SG01,
C15, C01, DB01, C02,
Q01, T01) are defective.
Does the power turn
on by pushing the
[START/STOP] button
of the remote control?
NO
YES
YES
NONO
YES
YES
NO
NO
NO
YES
YES
YES
NO
YES
YES
NO
Does the CN13
connector the wrong
connecting?
Does the thermal
fuse blow?
(Under PF. Terminal)
NO
NO
Replace the main
P.C. board.
Re-wiring the cable.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba RAS-10YAX-T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba RAS-10YAX-T in the language / languages: English as an attachment in your email.

The manual is 10,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info