497491
46
Zoom out
Zoom in
Previous page
1/59
Next page
46
10. PART REPLACEMENT
10-1. Indoor Unit
No. Part name Procedure Remarks
Q
Front panel 1) After stopping the operation of the air conditioner, be
sure to turn off the circuit breaker or disconnect the
power plug from the AC wall socket.
2) Open the screw caps and remove the two screws fixing
the front panel.
3) Close the screw caps as they were.
4) Open the horizontal louver right below by your finger.
5) Open the lower side of front panel until it touches the
horizontal louver, and remove it from the indoor unit by
turning it.
<To assemble the front panel>
1) Fix the two screws to secure the front panel.
2) Close the screw caps as they were.
3) Press four places where are the center, right end, left
end and lower portions of the air outlet.
4) Check the gap between the front panel and the main
unit.
If cooling or drying operation is performed without
pressing the center of the air outlet, the surface of the
front panel may be covered with frost and have a
waterdrop.
R
Electrical part
assembly
1) Perform the process
Q
above.
2) Remove the electrical part cover by pressing the nail
located on upper portion of the electrical part cover.
3) Remove the drain guide.
4) Remove the screw securing to the end plate of the heat
exchanger.
5) Remove the connector (3p+3p) for the fan motor and the
connector (6p) for the louver motor from the
microcomputer assembly.
6) After unhooking the electrical part base by pressing the
fixin
g
nail located on its lower portion, draw the electrical
part base out toward
y
ou to remove it from the main unit.
7) Pull the TC sensor out from the holder of the heat
exchanger.
(Keep it with the holder of TC sensor.)
8) Dress the connecting cable securely as shown in the
right illustration.
(Improper dressing will cause water leakage.)
S
Drain-pan
assembly
1) Perform the process
R
above.
2) Remove the drain-pan by pressing the four hooks
downwards.
(Keep it with the drain hose.)
5 5
2
3
4
2
3
3
3
3
3
When assembling dress the connecting
cable in loop and put it into the drain-pan.
TC sensor
Screw
Screw
Upper nail
Screw
Drain guide
Electrical
part cover
Lower fixing nail
Hooks
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba RAS-10YA-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba RAS-10YA-E in the language / languages: English as an attachment in your email.

The manual is 10,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info