Manual Toshiba RAS-07YA-ES RAS-10YK-ES (page 28 of 59) (English)

497493

Zoom out

Zoom in

1/59

– 28 –

<Left-hand connection with piping>

Bend the connecting pipe so that it is laid within 43

mm above the wall surface. If the connecting pipe is

laid exceeding 43 mm above the wall surface, the

indoor unit may unstably be set on the wall. When

bending the connecting pipe, make sure to use

spring bender so as not to crush the pipe.

Bend the connection pipe within a radius of 30

mm.

To connect pipe after installation of unit (figure)

196mm

96mm

Side of liquid flow

Side of gas flow

Outward form of indoor unit

(To the forefront of flare)

R 30mm (Use polisin or the like for bending pipe.)

43mm

Use the handle of screwdriver,etc.

Fig. 8-4-14

NOTE :

If the pipe is bent incorrectly, the indoor unit may

unstably be set on the wall.

After passing the connecting pipe through the pipe

hole, connect the connecting pipe to auxiliary pipes

and wrap the facing tape around them.

CAUTION

• Bind the auxiliary pipes (two) and connecting

cable with facing tape tightly. In case of leftward

piping and rear-leftward piping, bind the

auxiliary pipes (two) only with facing tape.

Indoor unit

Connecting

cable

Installation

plate

Auxiliary

pipes

• Carefully arrange pipes so that any pipe does

not stick out of the rear plate of the indoor unit.

• Carefully connect the auxiliary pipes and

connecting pipes to each other and cut off the

insulating tape wound on the connecting pipe

to avoid double-taping at the joint, moreover,

seal the joint with the vinyl tape, etc.

• Since dewing results in a machine trouble,

make sure to insulate both the connecting

pipes. (Use polyethylene foam as insulating

material.)

• When bending a pipe, carefully do it not to

crush it.

8-4-5. Indoor Unit Installation

(1) Pass the pipe through the hole in the wall, and

hook the indoor unit on the installation plate at

the upper hooks.

(2) Swing the indoor unit to right and left to confirm

that it is firmly hooked up on the installation plate.

(3) While pushing the indoor unit onto the wall by the

lower part, hook it up on the installation plate by

the lower part. Pull the indoor unit toward you by

the lower part to confirm that it is firmly hooked

up on the installation plate.

Push

Installation

plate

Hook here

(1)

(2)

Hook

Fig. 8-4-15

• For detaching the indoor unit from the installation

plate pull the indoor unit toward you while pushing

its bottom up by the specified parts.

Fig. 8-4-16

Push Push

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba RAS-07YA-ES RAS-10YK-ES in the language / languages: English as an attachment in your email.

The manual is 10,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Toshiba RAS-07YA-ES RAS-10YK-ES Manual

Product: