497472
12
Zoom out
Zoom in
Previous page
1/32
Next page
TOSHIBA RAS-07/10/13UKP (US) 1075000802
5EN
Loading the remote control batteries.
11
11
1 Remove the cover, and insert the batteries.
22
22
2 Press the RESET button.
The clock display flashes.
Adjust the clock.
Place back the cover.
Batteries
To replace the batteries, use two new batteries (AAA type).
In normal use, the batteries will last about one year.
Replace the batteries if there is no receiving beep from the
indoor unit or when the air conditioner cannot be operated
using the remote control.
To avoid malfunctions by battery leakage, remove the
batteries when not using the remote control for more than one
month.
NAMES AND FUNCTIONS OF INDICATIONS ON REMOTE CONTROL
Display
All indications, except for clock time indication, are indicated by pressing the START/STOP button.
11
11
1 Transmission mark
This transmission mark (,) indicates when the remote control transmits signals to the indoor unit.
22
22
2 Mode display
Indicates the current operation mode.
(AUTO : Automatic control, A : Auto changeover control,
: Cool,
: Dry, : Fan only)
33
33
3 Temperature display
Indicates the temperature setting (17°C to 30°C).
When you set the operating mode to
: Fan only, no temperature
setting is indicated.
44
44
4 Louver operation display
Indicates the louver positioning and operation.
Five selectable positions
,,,,
Automatic Swing
55
55
5 FAN speed display
Indicates the selected fan speed. AUTO or one of five fan speed levels
(LOW
, LOW
+
, MED , MED
+
, HIGH )
can be indicated.
Indicates AUTO when the operating mode is either AUTO or
: Dry.
66
66
6 TIMER and clock time display
The time set for timer operation or clock time is indicated.
The present time is always indicated except for TIMER operation.
77
77
7 Hi POWER display
Indicates when the Hi POWER operation starts.
Press the Hi POWER button to start and press it again to stop
the operation.
88
88
8 (MEMORY) display
Flashes for 3 seconds when the MEMO button is pressed during
operation.
mark is indicated when keeping the button depressed for more
than 3 seconds while the mark is flashing.
Press another button to turn off the mark.
99
99
9 ECO TIMER display
Indicates when the ECO TIMER is in operation.
Each time you press the ECO button, the display changes in the sequence of 1,3,5 or 9h.
PREPARATION AND CHECK BEFORE USE
Slide off the cover while
pressing the sides.
Battery replacement
Be careful not to reverse
the (+) position and the
() position.
In the illustration, all indications
are indicated for explanation.
During operation, only the
relevant indications will be
indicated on the remote control.
A
B
AUTO
FAN MODE
Hi-POWER
ON
OFF SET CLR
ECO
AUTO
TIMER
CLOCK CHECKRESET
FILTER
FIX
SWING
MEMO
2
13 2 8
9 67 5
A
B
AUTOA
4
01RAS-07/10/13UKP P03-05 2/1/02, 12:01 AM5
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba RAS-07UKP-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba RAS-07UKP-E in the language / languages: English as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info