497467
17
Zoom out
Zoom in
Previous page
1/32
Next page
10 EN
TOSHIBA RAS-07/10/13UKP (US) 1075000802
TIMER OPERATION
ON timer and OFF timer
Setting TIMER
11
11
1 ON/OFF TIMER button
Press the ON or OFF TIMER buttons as required.
The previous timer setting is displayed and flashes along
with ON/OFF TIMER display.
22
22
2 TIMER button
Press the TIMER button.
Set the timer to the desired time.
Each press of the TIMER button changes the time in ten minute steps.
Pressing the TIMER button continually changes the time in one hour steps.
33
33
3 SET
SET
button
Press the SET
SET
button to set the timer.
The timer time is indicated and the timer starts.
44
44
4 CLR
CLR
button
Press the CLR
CLR
button to cancel the timer setting.
Once you select the timer operation mode, the settings are saved in the remote control.
Thereafter, the air conditioner will start operating under the same conditions when you simply press the ON/OFF
button of the remote control.
If the clock display is flashing, you cannot set the timer.
Follow the instructions in the section SETTING THE CLOCK on page 6 to set the clock, and then set the timer.
CAUTION
When you select the timer operation, the remote control
automatically transmits the timer signal to the indoor unit at the
specified time. Therefore, keep the remote control in a location
where it can transmit the signal to the indoor unit properly.
If you do not press the SET
SET
button within 30 seconds after
setting the time, the setting will be cancelled.
Hi POWER OPERATION
High power (Hi POWER)
The Hi POWER (high power operation) mode automatically controls room
temperature, air flow and operation mode so that the room is quickly
cooled in summer. ( see page 15.)
Setting Hi POWER mode
11
11
1 Hi POWER button
Press the Hi POWER button. The Hi POWER lamp (green) on the display
panel of the indoor unit lights up. At the same time, the Hi POWER mark
on the remote control is indicated.
Canceling Hi POWER mode
11
11
1 Hi POWER button
Press the Hi POWER button once again.
The Hi POWER lamp on the display panel of the indoor unit lights goes out.
At the same time, the Hi POWER mark on the remote control goes out.
CAUTION
The Hi POWER mode cannot be activated in the DRY and FAN ONLY
operation and when the ON TIMER operation is reserved.
PRESET
FAN MODE
Hi-POWER
ON
OFF SET CLR
ECO
AUTO
TIMER
CLOCK CHECKRESET
FILTER
START/STOP
FIX
MEMO
SWING
1
1
A
PRESET
FAN MODE
Hi-POWER
ON
OFF SET CLR
ECO
AUTO
TIMER
CLOCK CHECKRESET
FILTER
START/STOP
FIX
MEMO
SWING
4
2
3
1
4
2
3
1
01RAS-07/10/13UKP P09-12 2/1/02, 12:02 AM10
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba RAS-07UA-ES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba RAS-07UA-ES in the language / languages: English as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info