215054

Toshiba mt700 dlp projector 720p Manual

27
Zoom out
Zoom in
Previous page
1/36
Next page
Menus
27
English
3. Color: Increases or decreases the color intensity of the image. The higher the value, the more
vivid and brighter the color.
4. Tint: Adjusts the color tones of the image. The higher the value, the more greenish the picture
becomes. The lower the value, the more purplish the picture becomes.
5. Filter: Turns the video and data filters on or off. Filters can reduce picture noise to produce a
sharper image. The higher the setting, the less the noise.
6. Sharpness: Adjusts the picture sharpness. The higher the number, the sharper the picture.
7. Extended Picture Setting
Q Color Temp: You can choose a preferred color temperature from among Lamp Native, Warm,
Middle, Cool, User 1, and User 2. Refer to for more information about storing the color
temperature to User 1 and 2.
Q Color Enhancement
Red: Adjusts red hues independently. The higher the setting, the greater the intensity of red
color in the image.
Green: Adjusts green hues independently. The higher the setting, the greater the intensity of
green color in the image.
Blue: Adjusts blue hues independently. The higher the setting, the greater the intensity of blue
color in the image.
Yellow: Adjusts yellow hues independently. The higher the setting, the greater the intensity of
yellow color in the image.
White: Adjusts white peaking.
8. Save Settings: There are three video memories in which users can store settings, including all
of the items in the Picture menu. Each input source can store up to 3 sets of User Memories.
Q To store the settings:
i.) Adjust the items in the Picture menu to your desired values.
ii.) Select Save Settings and then press .
iii.) Select To User’s Memory 1, To User’s Memory 2, or To User’s Memory 3 and press to store
the settings.
iv.) To close the OSD, press MENU.
9. Load Settings: Loads the settings from one of three User Memories or one of four default
settings (Dynamic, Standard, Theater 1, or Theater 2).
Display menu
Use this menu to set the way that the projector displays the picture.
1. Screen Size: Selects the aspect ratio for displaying different video signals.
2. PIP: Selects a second input signal for displaying a second image.
3. POP: Selects a second input signal for displaying a second image.
4. PIP/POP Source Swap: Toggles the active window between the two images. (You can make
adjustments to the active window only.)
5. PC Tuning: The following settings are only available when a PC or RGB signal is selected.
Q Frequency: Adjusts the frequency of the sampling clock that captures the input signal.
Q Phase: Adjusts the phase of the sampling clock.
Q H. Position: Adjusts the horizontal position of the image.
Q V. Position: Adjusts the vertical position of the image.
Q Auto: Adjusts the phase, and frequency automatically.
p.29
p.22
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba mt700 dlp projector 720p at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba mt700 dlp projector 720p in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info