485545
24
Zoom out
Zoom in
Previous page
1/42
Next page
24
VIWING COMPUTER IMAGES
DVI
RS-232C
Y
Cb/Pb Cr/Pr
To monitor port
To DVI terminal
Mini D-SUB 15pin-DVI
conversion cable
2
1
To DVI terminal
DVI cable
2
To DVI terminal
1
DVI
RS-232C
Cb/Pb Cr/Pr
A. Connecting this projector with a computer
Preparations:
Make sure that the power for the projector and computer are turned off.
With a desk-top type computer, disconnect RGB cables connected to the monitor.
In the case of analog connections:
1 Connect the attached mini D-SUB 15pin-
DVI conversion cable to DVI terminal of
the projector.
2 Connect the other end of the mini D-SUB
15pin-DVI conversion cable to the moni-
tor port of the computer.
A conversion connector, analog RGB output adaptor, and/or
the like may be needed depending on the type of computer to
be connected.
If a long cable other than the attached cable is used, the qual-
ity of projected images may be degraded.
When viewing picture images from a computer with analog
connection, press DVI-ANALOG button of the remote control-
ler.
This projector does not comply with 3-line-signals (SYNC-ON-
GREEN).
This projector does not comply with chrominance signals.
In the case of digital connections:
1. Connect a commercially available DVI
cable to DVI terminal of this projector.
2. Connect the other end of the DVI cable
to DVI terminal of the computer.
A conversion connector, analog RGB output adaptor, and/or
the like may be needed depending on the type of computer to
be connected.
If a long cable other than the attached cable is used, the qual-
ity of projected images may be degraded.
When viewing picture images from a computer with digital con-
nection, press DVI-DIGITAL button of the remote controller.
Also, read the instruction manual of the other equipment to be connected.
If VGA60 signal outputs at the startup of the computer, the projected image may not be displayed properlyÑüfor
example, the position of the displayed image may be shifted. However, this is not a failure (Non-compliant
signal).
No speaker for audio outputs is stored in this projector. To reproduce audio signals, use the speakers of the
personal computer, or connect necessary audio equipment.
Consult the delivery agent of this projector on the detailed connections, as needed.
B. Plugging power cord
Plug the power cord in the same way as described in Connecting to video equipment. See Page 17.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba MT500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba MT500 in the language / languages: English as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info