587682
22
Zoom out
Zoom in
Previous page
1/81
Next page
19
Full opening of the valve
Open the valve of the outdoor unit fully.
Using a 4mm-hexagonal wrench, open fully the
valve key on the liquid side.
Using a spanner open fully the valve key on the
packed valve at suction gas side.
Using a pair of pinchers, open fully the handle on the
ball valve at the discharge gas side.
Be careful that the handling of the ball valve differs
from that of the packed valve.
How to open the ball valve at gas side
Valve handling precautions
Open the valve stem or the handle until it strikes
the stopper.
It is unnecessary to apply further force.
Securely tighten the cap with a torque wrench.
Cap tightening torque
Position of grooves for driver
*1. When opened fully, do not apply an excessive
torque after the screwdriver hit the stopper;
otherwise a trouble may be caused on the valve.
Heat insulation for pipe
Apply the heat insulation to the pipework separately.
(liquid, suction and discharge).
Use thermal heat insulation which can withstand
temperatures of 120°C or more.
CAUTION
Upon completion of the pipework connections fit
the piping/wiring panel and the pipe cover.
Gaps between the pipes and the cover are to be
filled using a suitable putty or silicone.
If the pipework is fitted in the downward or
sideways position, ensure that the base plate
and side plate are closed and sealed.
If an opening is left unsealed there is a risk of a
fault due to the entering of water or dust.
Valve size
Ø9.5
Ø15.9
Charge port
33 to 42Nm (3.3 to 4.2kgfm)
20 to 25Nm (2.0 to 2.5kgfm)
14 to 18Nm (1.4 to 1.8kgfm)
Valve unit
Charge port
Using a minus screwdriver,
turn it counterclockwise by
90˚ until it hits the stopper.
(Full open)
Flare nut
Grooves
for driver
Closed completely Opened fully
3
REFRIGERANT PIPING
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba MCY-MAP0501HT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba MCY-MAP0501HT in the language / languages: English, German as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info