215050

Toshiba lcd data projector tlp x2500a Manual

28
Zoom out
Zoom in
Previous page
1/31
Next page
55
Others
54
If you think something is wrong, check the followings before contacting customer service.
Please see “Trouble indications”
p.54
as well.
If This Happens Check
No power
Power goes out
during use
No picture
No audio
Picture not
displayed
correctly
Picture blurred
Part of picture
out of focus
Image is dark
Colors too light
Bad shading
Control panel
key doesn’t work
Remote control
doesn’t work
Before calling service personnel
• Is the power cord plugged in? Is it connected to the projector?
• Is the lamp cover attached properly?
p.51
• Is the ambient temperature high?
p.54
• Is the air intake or air exhaust blocked?
p.54
• Is the projector turned on? (When [Auto input search] is [Off])
p.27
• Is the mute function on?
p.31
• Is the brightness setting minimized?
p.37
• Are the connections set up correctly?
p.23
• Are all the connected devices functioning properly?
• Is the mute function on?
p.31
• Is the volume setting minimized?
p.28
• Are the connections set up correctly?
p.23
• Are all the connected devices functioning properly?
• Is the input signal supported by the projector?
p.57
,
p.58
• Is there something generating an abnormal video signal, for
instance the video tape?
• Is the lens dirty?
p.53
• Is the lens focus adjusted optimally?
p.28
•
Is the projection distance within the projector’s supported range?
p.22
• Is the projector’s screen placement angle tilted too far?
p.22
• Are the sharpness or sampling phase adjustments off?
p.37
• Are the brightness or contrast adjustments off?
p.37
• Is the lamp nearing the end of its service life?
p.44
• Are the color, R-level, G-level, or B-level adjustments off?
p.37
• Is the screen dirty?
• Is the blackboard mode set properly?
p.39
• Is the lamp nearing the end of its service life?
p.44
• Is the key lock function on?
p.43
,
p.44
• Has the control panel been installed properly?
p.15
• Is the remote control ON/OFF switch set off?
p.20
• Is the remote control code identical with the projector's code?
p.43
• Are the remote control’s batteries drained?
• Are the batteries inserted into the remote control correctly?
p.20
• Is the remote control being used within the effective range?
p.20
•
Are there any obstructions between the remote control and projector?
• Are there any fluorescent or other bright lights shining at the
projector’s infrared remote sensor?
The indicator lights to inform you of internal abnormalities.
No power
⇒ Problem with projector
• Unplug the power cord, and contact your dealer.
Lamp went out during use, or won’t come on
⇒ Lamp temperature is high so that it is difficult to turn on, the lifetime of the
lamp has ended or the projector is malfunctioning.
• Unplug the power cord and wait for a short while, then turn the power
back on.
• If a lamp burns out, replace it with a new one.
❈ The abnormal display will not disappear until the power cord is
unplugged.
You can not turn on the power during abnormal display.
Power went out during use
⇒ Internal overheating, or the outside temperature is too high.
• Place the projector so that the air intake and exhaust are not blocked.
• Unplug the power cord and wait for a short while, then turn the power
back on.
❈ The
icon will appear before the power goes out.
❈ The abnormal display will not disappear until the power cord is
unplugged.
You can not turn on the power during abnormal display.
Power went out during use
⇒ Problem with internal cooling fan.
• Unplug the power cord, and contact your dealer.
❈ The
icon will appear before the power goes out.
❈ The abnormal display will not disappear until the power cord is
unplugged.
You can not turn on the power during abnormal display.
Power went out during use, or power won’t come on
⇒ The lamp cover is not properly attached.
• Unplug the power cord, and reattach the lamp cover.
p.51
❈ The abnormal display will not disappear until the power cord is
unplugged.
You can not turn on the power during abnormal display.
Power went out during use
⇒ Problem inside the projector.
• Unplug the power cord and wait for a short while, then turn the power
back on.
• If the above action will not clear the problem, unplug the power cord,
and contact your dealer.
❈ The
or icon will appear before the power goes out.
❈ The abnormal display will not disappear until the power cord is
unplugged.
You can not turn on the power during abnormal display.
(Off)
(Red
flashing)
(Red lit)
(Red lit)(Red lit)
Or
(Red
flashin
g
)
(Red lit)
(Green
flashin
g
)
(Red lit)
(Orange
flashin
g
)
(Red lit)
(Red lit) (Orange
lit)
Or
(Orange
flashin
g
)
Trouble indications
Others
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba lcd data projector tlp x2500a at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba lcd data projector tlp x2500a in the language / languages: English as an attachment in your email.

The manual is 5,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info