42
Multifunctional Settings (continued)
Multifunctional Settings (continued)
OPTION Menu (continued)
Item Description
SERVICE
Pressing the (or the ENTER) button calls the SERVICE menu.
SERVICE Menu
Select an item using the / buttons, and press the (or the
ENTER) button to per form each function. :
FANSPEED AUTO ADJUST LENS TYPE LENS LOCK GHOST FILTER MESSAGE
FANSPEED
Select the fan speed level using the / buttons. : HIGH NORMAL
T
he HIGH ups rotation speeds of fans, though. Please use this
function in using a projector at highlands etc.
memo
Note that the projector is noisier when the HIGH is selected.
AUTO
ADJUST
Select the ENABLE or the DISABLE using the / buttons. :
ENABLE DISABLE
When the ENABLE is selected, detecting a signal change to a RGB
signal performs the automatic adjustment of the vertical position (V
POSITION), the horizontal position (H POSITION), the clock phase
(H PHASE) and the horizontal size (H SIZE).
Depending on conditions, such as input image, signal cable to the unit,
environment around the unit, etc., the automatic adjustment may not
work correctly. In such a case, please choose DISABLE to disable the
automatic adjustment, and adjust manually.
LENS TYPE
Select the lens type currently used using the / buttons. :
AUTO 1 2 3 4 5
Please select depending on the following.
AUTO: automatically selects optimum mode.
1: for a standard lens
2: for a fixed short throw lens
3: for a short throw lens
4: for a long throw lens
5: for a super long throw lens
memo
This setting has an influence on the keystone distortion etc.
memo About the optional lens, ask your dealer.
LENS LOCK
Select the TURN ON or the TURN OFF using the / buttons. :
TURN ON TURN OFF
Selecting the TURN ON locks the adjustment of the lens shift, the zoom and the focus.
GHOST
1. Choose a color element of ghost using the bottons / .
2. Adjust the chosen element using buttons / to disappear ghost.
FILTER
MESSAGE
Use the / button to set the timer for the interval to show the message for cleaning up the air filter.
100h
200h
300h
TURN OFF
50h
After selecting "50h", "100h", "200h" or "300h", the message “REMINDER …” will
appear after the timer reaches the interval time set by this operation. Please
refer to the "FILTER TIME" item and the table "Related message" .
When "TURN OFF" is chosen, the air filter cleaning message will not appear. Selecting "TURN
OFF" displays the message to call an attention to disabling the air filter cleaning message.
•
Please check and clean the air filter periodically, even if there is no message. If
the air filter becomes blocked by dust or others, the internal temperature will rise,
which could cause malfunction, or reduce the lifetime of the projector.
•
It is recommended to choose "100h" in general. Please be careful with the operating environment
of the projector and the condition of air filter, especially when "200h", "300h" or "TURN OFF" is chosen.
RESET
Select the EXECUTE using the button to reset the OPTION menu items. :
EXECUTE CANCEL
The items of the OPTION menu are collectively returned to the initial setting.
Note that
the items “VOLUME”, “LAMP TIME”, “FILTER TIME” and “SERVICE” are not reset.
