481897
28
Zoom out
Zoom in
Previous page
1/368
Next page
26 1.BEFORE USING EQUIPMENT
1.Description of Each Component (Cont.)
1Other options available are as follows. Contact your service technician or Toshiba product distributors for
details.
FAX Unit (GD-1170)
This is a unit for using the equipment as a Fax.
Installed inside of the equipment
The PCI Slot (GO-1050) is necessary.
Printer Kit (GM-1050)
This is a kit for using the printing function.
This kit is for the e-STUDIO520/600/720/850. Use the GM-1051 for the e-STUDIO523/603/723/853.
Printing using a printer driver supporting XPS is not available.
Printer Kit (GM-1051)
This is a kit for using the printer function.
Printing using a printer driver supporting XPS can be performed if the Memory (GC-1230) is installed in
the equipment.
Printer/Scanner Kit (GM-2040)
This is a kit for using the printing and scanning functions.
This kit is for the e-STUDIO520/600/720/850. Use the GM-2041 for the e-STUDIO523/603/723/853.
Printing using a printer driver supporting XPS is not available.
Printer/Scanner Kit (GM-2041)
This is a kit for using the printing and scanning functions.
Printing using a printer driver supporting XPS can be performed if the Memory (GC-1230) is installed in
the equipment.
Scanner Kit (GM-4010)
This kit enables the scanning function.
Memory (GC-1230)
Printing using a printer driver supporting XPS can be performed if this memory is installed together with
the Printer Kit (GM-1051) or Printer/Scanner Kit (GM-2041).
Data Overwrite Kit (GP-1060)
This is a kit to erase the data stored temporarily when copying, printing, scanning, Fax, internet Fax or net-
work Fax is performed. It overwrites temporarily stored data with random data.
Installed inside of the equipment
Scrambler Board (GP-1040)
This board enhances the security of the equipment. Data are encrypted when they are written into the hard
disk of the equipment, and decrypted when they are read.
Installed inside of the equipment
The PCI Slot (GO-1050) is necessary.
Parallel Board (GF-1140)
This unit is used to connect between the equipment and a PC with a parallel cable.
The PCI Slot (GO-1050) is necessary.
Wireless LAN Module (GN-1041)
This module enables the equipment to be used in a wireless LAN environment.
Installed inside of the equipment
The Antenna (GN-3010) is necessary.
The equipment cannot be connected to the wireless and wired LAN at the same time.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba e-STUDIO 853 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba e-STUDIO 853 in the language / languages: English as an attachment in your email.

The manual is 8.62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba e-STUDIO 853

Toshiba e-STUDIO 853 User Manual - English - 214 pages

Toshiba e-STUDIO 853 User Manual - German - 96 pages

Toshiba e-STUDIO 853 Quick start guide - Dutch - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info