804407

Toshiba e-STUDIO 6529A Manual

186
Zoom out
Zoom in
Previous page
1/216
Next page
4.OTHER PRINTING METHODS
186 Printing From UNIX/Linux
Stapling
This sets whether a print job is printed with staples. When the optional Finisher is installed it can be activated using
the following option.
If this option is not specified, the printer’s default value will be used.
Example: The command to staple in the upper left corner of a long edge feed portrait page is “lp -o staple=1
<filename>”.
The value for the stapling position depends on the paper size, the paper feed direction, and the print direction. For the
available paper sizes to this function, see the reference below.
Specifications - SPECIFICATIONS OF OPTIONS - Exit Options
In particular, A5, A6 and statement paper sizes will not work with this function.
Select [Tray 2] for stapling with the Finisher or the Saddle Stitch Finisher.
Option Value Alternate Value Description
staple=0 Stapling is turned off.
staple=1 Staple in the top left corner of a portrait page and the upper right corner of
a landscape page.
staple=2 Put two staples on the left side of a portrait page or the top side of a
landscape page printed on long-edge-feed paper. This command has no
effect when the paper is fed from the short-edge side.
staple=3 Staple in the bottom left corner of a portrait page and the upper left corner
of a landscape page.
staple=4 Staple in the top right corner of a portrait page and the bottom right
corner of a landscape page.
staple=5 Put 2 staples on the right side of a portrait page or the bottom side of a
landscape page printed on long-edge-feed paper. This command has no
effect when the paper is fed from the short-edge side.
staple=6 Staple in the bottom right corner of a portrait page and the lower left
corner of a landscape page.
staple=7 Put 2 staples on the top side of a portrait page or the right side of a
landscape page printed on short-edge-feed large format (A3/Ledger)
paper. This command has no effect when the paper is fed from the long-
edge side or small paper size.
staple=8 Put 2 staples on the bottom side of a portrait page or the left side of a
landscape page printed on short-edge-feed large format (A3/Ledger)
paper. This command has no effect when the paper is fed from the long-
edge side or small paper size.
staple=9 Put 2 staples in the middle of a landscape page and fold the paper in half
vertically along the staple line (saddle stitching). This command works in
conjunction with booklet printing. This command has no effect when the
paper is fed from the long-edge side.
… 186 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba e-STUDIO 6529A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba e-STUDIO 6529A in the language / languages: English as an attachment in your email.

The manual is 7.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info