804407

Toshiba e-STUDIO 6529A Manual

88
Zoom out
Zoom in
Previous page
1/216
Next page
2.PRINTING FROM WINDOWS APPLICATIONS
88 Printer Driver Functions
4Paper Source This selects a paper source to print a job in the most suitable paper size. The
figure on the right indicates the paper size set for each paper source. When you
select a paper source, the chosen one is indicated with a green square in the
figure.
You can select a paper source by directly clicking on the figure on the right.
When [Bypass Tray] is selected and print a job, [JOB STATUS] on the touch panel will blink. Press [JOB
STATUS] and check the paper size of the job. Then set the paper and press the [START] button to print a job.
When you select the bypass tray as a paper source but the orientations of the original and the paper on the
bypass tray differ, the data in the original are rotated for 90 degrees and printed in the same orientation as
that of the original, as long as their paper sizes are the same (this is available only for A4, B5, LT and 16K). For
example, when an original is A4 in a portrait direction but the paper on the bypass tray is A4, the data of the
original are printed in A4 in a portrait direction.
The selectable values vary depending on the optional devices installed in this equipment and their
configuration on the [Device Settings] tab.
When a paper type such as special or tab paper that needs to be fed from the bypass tray is set, [Bypass Tray]
may be automatically selected in the [Paper Source] box, and then a confirmation dialog box may appear.
When the paper size settings on the [Device Settings] tab differ from those in the equipment, the paper
source setting is ignored and the equipment may prompt to set the paper in the bypass tray.
The Large Capacity Feeder is not available for some countries or regions.
5Paper Type This sets the media type of the paper.
The applicable paper weight for each paper type differs depending on the model. For details of the paper
weight, see the reference below.
Specifications - SPECIFICATIONS OF PAPER - Acceptable paper
For paper available for [Special 1], [Special 2] and [Special 3], contact your service technician.
When [A4 Tab] or [Letter Tab] is selected at the [Print Paper Size] box, [Tab] will be displayed and you cannot
select other paper types.
When [Envelope] is selected at the [Print Paper Size] box, [Envelope] will be displayed and you cannot select
other paper types.
Do not use [USER TYPE 1] to [USER TYPE 10].
For more information about the paper types that are available for this equipment, see the reference below.
Specifications - SPECIFICATIONS OF PAPER - Acceptable paper
6Destination This selects the tray to which the print job is made to exit. The figure on the right
indicates the destination currently set with an arrow.
The destination is limited to [Saddle Tray] when you perform folding print or saddle stitch print with the Saddle
Stitch Finisher installed.
You can select a paper source by directly clicking on the figure on the right.
When installing the finisher, if you want to suppress the initial operation, please set it to [Tray 1].
7Number of Copies This sets the number of printed copies.
8Orientation This sets the paper printing direction.
Item Name Description
… 88 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba e-STUDIO 6529A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba e-STUDIO 6529A in the language / languages: English as an attachment in your email.

The manual is 7.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info